Proton Calorimetry/Experimental Runs/2018/Nov16-18

2 night shifts with range calorimeter and single PMT module.

Equipment List

Item	Notes
Portable Enclosure	Modified Zarges 1510 Waterproof Wheeled Equipment Case. 230 x 555 x 350mm Features mount for scintillator and PMT, opening for beam, and ports for SHV, BNC, and SMA cables. Mylar window with Al support mounted to internal face: approximately light-tight. BNC output from case connected to SMA splitter.
DAQ desktop PC
Control Laptop
Ethernet Switcher	Set in experiment room and connected DAQ desktop PC. Output sent to control room Network Hub.
Network Hub	Set in control room to take output from ethernet switcher. Control laptops connected via ethernet or 5GHz WiFi.
Ethernet Cable x 2	To connect DAQ PC to switcher, switcher to Network Hub.

Single Module Experiment

Item	Notes
Single Module Scintillator Blocks x5	1cm/3cm/5cm x 10cm x 10cm standard scintillator block. Optical gel required to couple Scintillator to PMT. 5cm and 3cm with black wrapping. 5cm, 3cm, 1cm mylar wrapping.
Photomultiplier Tube	Hamamatsu R13089 2"
Portable Enclosure	Modified Zarges 1510 Waterproof Wheeled Equipment Case. 230 x 555 x 350mm Features mount for scintillator and PMT, opening for beam, and ports for SHV, BNC, and SMA cables. Mylar window with Al support mounted to internal face: approximately light-tight. BNC output from case connected to SMA splitter.
Caen DT5751 Digitiser	Records PMT output, connected via SMA-MCX conversion. Used channel 3.
DAQ desktop PC	Controls Caen HV supply; records data from Caen digitiser.
Caen NDT1470 HV Supply	Supplies HV to PMT
USB Cable	Caen units to DAQ PC
Male-to-Male SMA Cable x2	Signal from enclosure port to digitiser. Short/Light and Long cables connected trough SMA to SMA connector
Female-to-Female SMA Connector	Connects Long SMA cable to Short/Light SMA cable.
Male SMA to Male MCX Adaptor	Sends output from SMA cable to Digitiser
Gloves	For handling scintillator
Optical gel	For coupling scintillator to PMT
Wipes	For removing optical gel

ISDI sensor + scintillator stack

Single module

Run Number	High Voltage (V)	Trigger Level (mV)	Trigger Source	Beam Current / Rate	Collimator	Filename	Notes
00	-900	70, +ve	Tracker (C2)	170pA/~10 kHz	2 mm centred	run00_2mmCCol_160pA_TrackTrig	First test of tracker/PMT synchronisation