Proton Calorimetry/Equipment/Inventory Location

From PBTWiki

(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
List of tools and equipment stored in D106 updated on Dec 2020.
List of tools and equipment stored in D106 updated on Dec 2020.
-
A collection of photos can be found in the directory: [ http://www.hep.ucl.ac.uk/pbt/wikiData/photos/Inventory_Dec2020/photos/ /unix/www/html/pbt/wikiData/photos/Inventory_Dec2020]
+
A collection of photos can be found in the directory: [ /unix/www/html/pbt/wikiData/photos/Inventory_Dec2020 http://www.hep.ucl.ac.uk/pbt/wikiData/photos/Inventory_Dec2020/photos/]

Revision as of 19:35, 30 December 2020

List of tools and equipment stored in D106 updated on Dec 2020. A collection of photos can be found in the directory: [ /unix/www/html/pbt/wikiData/photos/Inventory_Dec2020 http://www.hep.ucl.ac.uk/pbt/wikiData/photos/Inventory_Dec2020/photos/]


Contents

WOODEN BOOKSHELF

  • 2 PELI cases
    • 1 PELI CASE contains HV+Digitiser
    • 1 PELI CASE contains the Thunderbolt Expansion Chassis with Display Port (CMOS sensor graphic card)
  • Adam Gibson Nikon camera tools (in the orange plastic bag)
  • Mylar Windows for Experimental Runs
  • Travel Router
  • Features mount for scintillator and PMT
  • USB to USB cables
  • Ethernet cabler: different length
  • Empty Thunderbolt Expansion Chassis with Display Port box (only power cables inside)
  • 1 USB to USBC cable
  • 1 USB to microUSB cable
  • 3 microUSB to USBc cables (different lengths)


STANLEY BIG CASE

  • 1 Power strip: USB and Universal sockets
  • Mains power cables
  • Wifi router LINKSYS AC1900
  • USB to USB long cables
  • 4 grommet kits
  • Long SHV cables for HV power supply
  • Desktop switch
  • WARCO Vice


PELI Case trolley n.1

  • Caen NDT1470 HV Supply
  • Caen NDT1470 HV Supply power adaptor + mains cable
  • SHV cables for HV power supply
  • Caen DT5751 Digitiser
  • Caen DT5751 Digitiser power cable
  • USB Cable to connect the digitiser to the laptop
  • SMA to SMA short cable


PELI Case trolley n.2

  • Neutral filter (fragile)
  • Thunderbolt Expansion Chassis with Display Port (CMOS sensor graphic card)
  • Mains power cable + graphic card power supply
  • USBc to USBc cable to connect the graphic card enclosure to a laptop
  • Travel network switch
  • Network switch power cable: USB to barrel power connector
  • Short ethernet cable


DeWALT Tower

From Bottom to Top

  • Bottom Case. Case n. 1
    • Caliper
    • USB to USB cables
    • USB to jack type M Barrel 5V DC power supply (spare cable for the network switch)
    • D-Link Network switch empty box (the switch is in Peli Case 2)
  • Case n. 2
    • PMT
    • Silicone Optical grease
    • Scintillator cleaning wipes and liquid cleaner (isopropane?)
    • black tape
  • Case n. 3
    • SMA to SMA long and short robust cables
    • BNC to BNC cable
    • BNC to MCX cables for the CAEN digitiser
  • Case n. 4
    • Wera Tools: screwdrivers set , blade and L keys
  • Case n. 5
    • Scintillators with different sizes. Additional scintillator sheets are on my desk
  • Case n. 6
    • BNC, SMA, and SHV patch panel
    • 1 Power strip: USB and Universal sockets
    • Mains power cable
    • Ethernet cables
    • 1 box containing: DC-4200 MHz Signal Splitter, SMA connectors, BNC to SMA connectors and SMA to MCX adaptor. Spanner for SMA connectors.
  • Case n. 7
    • ISDI CMOS sensor
    • sensor enclosure screws and washers
    • Camera Link Cable
  • Top container. Case n. 8
    • BNC, SMA, and MCX connectors
    • USB sockets for the parch panel
    • Tape Measure
    • Photodiodes and LEDs
Personal tools