Proton Calorimetry/Equipment/Inventory Location

From PBTWiki
Jump to navigation Jump to search

List of tools and equipment stored in D106 updated on Dec 2020.


WOODEN BOOKSHELF

  • 2 PELI cases
    • 1 PELI CASE contains HV+Digitiser
    • 1 PELI CASE contains the Thunderbolt Expansion Chassis with Display Port (CMOS sensor graphic card)
  • Adam Gibson Nikon camera tools (in the orange plastic bag)
  • Mylar Windows for Experimental Runs
  • Travel Router
  • Features mount for scintillator and PMT
  • USB to USB cables
  • Ethernet cabler: different length
  • Empty Thunderbolt Expansion Chassis with Display Port box (only power cables inside)
  • 1 USB to USBC cable
  • 1 USB to microUSB cable
  • 3 microUSB to USBc cables (different lengths)

STANLEY BIG CASE: - 1 Power strip: USB and Universal sockets - Mains power cables - Wifi router LINKSYS AC1900 - USB to USB long cables - 4 grommet kits - Long SHV cables for HV power supply - Desktop switch - WARCO Vice

PELI Case trolley n.1: - Caen NDT1470 HV Supply - Caen NDT1470 HV Supply power adaptor + mains cable - SHV cables for HV power supply - - Caen DT5751 Digitiser - Caen DT5751 Digitiser power cable - USB Cable to connect the digitiser to the laptop - SMA to SMA short cable


PELI Case trolley n.2: - Neutral filter (fragile) - Thunderbolt Expansion Chassis with Display Port (CMOS sensor graphic card) - Mains power cable + graphic card power supply - USBc to USBc cable to connect the graphic card enclosure to a laptop - Travel network switch - Network switch power cable: USB to barrel power connector - Short ethernet cable

From Bottom to Top 1 Bottom Case - Caliper - USB to USB cables - USB to jack type M Barrel 5V DC power supply (spare cable for the network switch) - D-Link Network switch empty box (the switch is in Peli Case 2)

.  

2. - PMT - Silicone Optical grease - Scintillator cleaning wipes and liquid cleaner (isopropane?) - black tape


3. -SMA to SMA long and short robust cables -BNC to BNC cable -BNC to MCX cables for the CAEN digitiser



4. Wera Tools: screwdrivers set , blade and L keys


5. Scintillators - different sizes. Additional scintillator sheets are on my desk



6 - BNC, SMA, and SHV patch panel - 1 Power strip: USB and Universal sockets - Mains power cable - Ethernet cables - 1 box containing: DC-4200 MHz Signal Splitter, SMA connectors, BNC to SMA connectors and SMA to MCX adaptor. Spanner for SMA connectors.


7 -ISDI CMOS sensor - sensor enclosure screws and washers - Camera Link Cable



8 Top container - BNC, SMA, and MCX connectors - USB sockets for the parch panel - Tape Measure - Photodiodes and LEDs -