Proton Calorimetry/Experimental Runs: Difference between revisions

From PBTWiki
Jump to navigation Jump to search
(Created page with "Information is available for the following experimental runs: == 2016 == ; 2nd+3rd August 2016 : Give short explanation of the purpose and results. ...")
 
Line 4: Line 4:


; [[/2016/Aug2-3|2nd+3rd August 2016]]
; [[/2016/Aug2-3|2nd+3rd August 2016]]
: Give short explanation of the purpose and results.
* To obtain energy-to-range calibration measurements with a calibration wheel used by physicists at Clatterbridge with detector module comprising a 2" PMT and new PS-based scintillator.
* To obtain data cross-checking measurements taken with the wheel to that taken with PMMA blocks of equivalent thickness at the same location, and further upstream at the modulator box.
* To record total dose delivered to the new PS-based scintillator for radiation damage and hardness considerations.
* To record waveform data with new LeCroy HDO6104 oscilloscope.
* To record neutron measurements (with the hex module?).


== [[/2015|2015]] ==
== [[/2015|2015]] ==

Revision as of 11:47, 15 August 2016

Information is available for the following experimental runs:

2016

2nd+3rd August 2016
  • To obtain energy-to-range calibration measurements with a calibration wheel used by physicists at Clatterbridge with detector module comprising a 2" PMT and new PS-based scintillator.
  • To obtain data cross-checking measurements taken with the wheel to that taken with PMMA blocks of equivalent thickness at the same location, and further upstream at the modulator box.
  • To record total dose delivered to the new PS-based scintillator for radiation damage and hardness considerations.
  • To record waveform data with new LeCroy HDO6104 oscilloscope.
  • To record neutron measurements (with the hex module?).

2015

21st-22nd December 2015
Give short explanation of the purpose and results.
8th-9th July 2015
Give short explanation of the purpose and results.