Proton Calorimetry/Experimental Runs/2019/Apr12-15

From PBTWiki
Jump to navigation Jump to search

3 night shifts with range calorimeter + SDLR

Experiment Equipment

Item Notes
Network Hub Set in control room to take output from experimental room ethernet connection. Control laptops connected via 5GHz WiFi.
Control Laptop x3 2x remote control for sensor and sdlr, 1 for notes
DAQ laptop
Ethernet Cable x 2 To connect DAQ laptop to network in the experimental room, network hub to network in control room.
Portable Enclosure Modified Big Zarges Waterproof Wheeled Equipment Case.

Features mount for scintillator and PMT, opening for beam, and ports for SHV, BNC, SMA, Camera Link cables.
Hole for sensor powering.
Mylar window with Al support mounted to internal face: approximately light-tight.

Scintillator stack 14 x 2 mm, 15 x 2.6 mm and 20 x 3 mm sheets in ascending order from the front/beam of the end of the scintillator. Sheet 21 not used. Sheet numbers from front to end (in beam direction): 30,29,28,27,26,22,19,18,17,15,14,13,10,7,25,24,23,20,16,12,11,9,8,6,5,4,3,2,1,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50.
ISDI CMOS sensor sensor pixel dimension: 1030 x 1536. NO optical grease between scintillator and sensor. Connected to DAQ PC via Camera Link cable.
DAQ desktop PC Controls sensor aquisition.
Gloves For handling scintillator

Range Detector Experiment

RangeExperiment.png

ISDI Sensor Instructions

General Sensor Configuration Base Configuration is 14 x 1 Bit Resolution is 1030 x 1536 pixels For selecting pixel rows in centre: Use horizontal offset (ignore DVAL to activate field) and horizontal resolution

Increase number of frame buffers To increase the number of frame buffers to the allowed maximum, start XCAP as administrator. Select Capture/Sequence Capture/Video to Frame Buffers/Driver Assistant Tick box in left field, then set number of frame buffers here.

Serial Terminal instructions for ISDI sensor Find serial terminal in PIXCI(R) tab of sensor control software. In Controls/Options: Make sure "Send string with CR" is selected. Should be default. In Controls/Setup: Select Serial Port: Enabled. Baud rate has to be 115200 Set low full well mode using W000300000 Set high full well mode using W000300004 Read full well mode using R0003

Continuous Field buffer setting This setting makes sure that the buffer is filled with a new frame as they come in. If this option is not selected the sensor and software will not be synchronised and we will record a lot of pitch black images. Select Capture/Live Options//Live Mode/Live Video: Continuous All buffer capture

Experiment List

12–13th April

  1. Find convenient beam intensity that does not saturate sensor: lowest clinical beam energy, smallest beam focus
  2. Calibration of detector (highest clinical energy). Shoot from front and back of stack (we have a new entrance window at the back of the stack). Also calibrate at different focus sizes. Also test camera: focus on front of beam stack and centre of beam stack and compare.
  3. Test focus (beam size) dependence: shoot pencil beam with ~10 cm range at different focus sizes
  4. Measure WET of known blocks of plastic to calibrate range telescope using a pencil beam with ~10cm range. Lennart will check if he can find some PMMA slabs whose WET has been accurately measured. Ideally have some slabs between ~1mm and ~5cm WET thickness. We know that there are some PMMA slabs between 1mm and 5cm thickness, measured by Giulia Arico (OMA fellow). These measurements will be used to benchmark Laurent's reconstruction code. Use tightest beam focus.
  5. Repeat 0.-3. with all available ions (protons, helium, carbon and oxgen)
  6. Measure SOBP of protons. 10cm deep, 3cm plateau
  7. Measure high proton energies (up to 250MeV) using PMMA absorber in front of range telescope.
  8. Measure a couple of oxygen pencil beams (range shift) and SOBP
  9. Disassemble detector.

13–14th April

  1. Shoot-through calibration for Helium and Carbon: 430.1MeV/u Carbon 30cm range, He 220.5MeV/u 30cm range.
    1. High full-well mode C Intensity: 8*10^7; He Intensity: 8x10^8.
    2. Low full well mode C Intensity: 3*10^7; He Intensity 3*10^8.
    3. Rotate detector; repeat.
  2. Carbon and Helium SOBP and single energy pencil beam:
    1. 2 Gy SOBP Carbon, Helium mix keep same intensity here and scale down later in data processing.
    2. Carbon and Helium Intensities both 8*10^7 (low Helium intensity!). Both high and low full well modes. Only measure low full well as sensor starts to come out of saturation.
    3. Carbon SOBP max range ~9cm (plateau 3cm longitudinal, 3x3cm2 lateral), He SOBP max range ~27 cm.
    4. Repeat with 220MeV/u pencil beam (C 10cm, He 30 cm).
  3. Add PMMA blocks, repeat previous measurement. 24 measurements; 5 changes in room. (5+5+5+2+2cm PMMA blocks, 19cm PMMA in total). Both high and low full well mode.
  4. Variable air gap measurements:
    1. 5cm PMMA, air gap, remaining PMMA absorber; total thickness of 20.8cm. Downstream sheets 5+5+2cm PMMA sheets plus half of unused pairs.
    2. Vary air gap width: 0mm, 2mm, 5mm, 10mm.
    3. Vary air gap depth: 1mm, 2mm, 5mm, 10mm.
    4. Upstream PMMA absorber 5cm; downstream PMMA absorber varies from 12.8cm to 13.7cm.
    5. 32 measurements, 16 absorber changes.
    6. For 5mm x 5mm gap, adjust focal spot size.
    7. Energy 220 MeV/u for both; intensity 8*10^7 for both; use focus setting 3 (8.5mm for Carbon; 8.1mm for Helium).
    8. Low full well mode for sensor.
  5. Half covered 2mm air gap:
    1. 5cm upstream PMMA, 2mm air gap on left-hand side, 13.6cm downstream PMMA absorber. 18.8cm total PMMA thickness.
    2. Sheet pulled out, 8mm pulled out from centre, half-centred, 8mm pushed in from centred, all the way in.
    3. Energy 210 MeV/u for both; intensity 8*10^7 for both; use focus setting 3 (8.5mm for Carbon; 8.1mm for Helium).
    4. Scan layer with 10x10 spots over 3x3cm area.
    5. Low full well mode for sensor.
    6. Take movie with DSLR.
  6. Moving platform measurements:
    1. Assemble PMMA stack on moving platform: upstream PMMA absorber 5cm; 5mm air gap; downstream PMMA absorber 13.3cm. Total thickness still 18.8cm.
    2. Gap width 5mm; gap depth 5mm.
    3. Irradiate with single energy Helium plan: 10x1 spot array (3cm wide) and move platform at the same time. Spot dwell time ~200ms. Total plan irradiation time: 5s. Total platform movement: 4cm.
    4. Take images with sensor: use 100 pixel wide sensor strip and long acquisition.
    5. Energy 210 MeV/u for both; intensity 8*10^7 for both; use focus setting 3 (8.5mm for Carbon; 8.1mm for Helium).
  7. Lung phantom measurements only(!) if enough time. Take lung phantom, place it on height adjustable table, place tumor in beam (180 MeV/u C and He), lift it by 0.5 cm

14–15th April

  1. Calibration helium and carbon. Carbon energy 430 MeV/u, focus: 4.1mm intensity 8*10^7, helium energy 220.5 MeV/u, focus 4.7, Intensity 7*10^8. High full well mode. 5cm PMMA absorber in front of detector. Repeat with low full well mode. Turn detector around. repeat.
  2. Lung phantom: align lung phantom with lasers. 6 spots 5 mm apart. Start 15 mm below tumor, step through until 15 mm above tumor. Helium energy 180 MeV/u, Intensity 8*10^7, spot focus 3, Carbon 180MeV/u, intensity 8*10^7, spot focus 3. 12 Measurements, 6 changes in room. Low full well mode of detector.
  3. Switch to high helium energies (remote controlled from accelerator crew). Helium/carbon Bragg-curve measurements at high energies: build up 50 cm of PMMA in front of detector. 6 measurements after each remove 10 cm PMMA. Helium energy 324MeV/u, Intensity 7*10^8, spot size 7mm, Carbon 324MeV/u, Intensity 8*10^7, spot focus 8mm.
  4. ADAM setup: Place ADAM in isocentre. 4 measurements: Uninflated rectum, 30 Ml Air, 45 Ml Air, 60 Ml Air, 50 Ml air. Rectum ballon inserted to 15cm. Helium energy 324, Intensity 7*10^8, spot 7mm, Carbon energy 324MeV/u, intensity 8*10^7, spot 8mm. 5 measurements, 4 changes in room.
  5. Align isocenter with predefined spot. repeat 4. 5 measurements, 4 changes in room.
  6. if time: repeat 3 with spot in between isocentre and predefined rectum spot (horizontal alignment isocenter, vertical 1 cm below isocenter), and spot above isocenter (horizontal alignment isocenter, vertical alignment 1cm above).
  7. if time: align ADAM in isocenter, rotate by 2 degree steps. helium energy 324MeV/u, I= 7*10^8, s=7mm; Carbon E = 324 MeV/u, I = 8*10^7, s = 8mm. 5 measurements, 5 changes in room. High full well.
  8. if time: align ADAM in isocenter, horizontal shift by 1 cm. helium energy 324MeV/u, I= 7*10^8, s=7mm; Carbon E = 324 MeV/u, I = 8*10^7, s = 8mm. 3 measurements, 3 changes in room. High full well.
  9. Place ADAM in upright position. repeat 4 and 5 with AP beam (30 degree gantry rotation). helium energy 260 MeV/u, I= 7*10^8, s=7mm; Carbon E = 260 MeV/u, I = 8*10^7, s = 8.2mm. High full well.
  10. ADAM PETer setup: Place phantom in upright position. Fill with oil (measurements need to be fast, phantom heavily leaking oil). Place 2cm PMMA degrader in front of beam. To degrade energy down to ~300 MeV/u.
  11. align ADAM PETer in isocenter, vertical shift by 1 cm. helium energy 324MeV/u, I= 7*10^8, s=7mm; Carbon E = 324 MeV/u, I = 8*10^7, s = 8mm. High full well. 5 measurements, 4 changes in room.
  12. align ADAM PETer in isocenter, rotate, 3 measurements (0, 2, 4, 10 degree). helium energy 324MeV/u, I= 7*10^8, s=7mm; Carbon E = 324 MeV/u, I = 8*10^7, s = 8mm. 4 measurements, 4 changes in room. High full well.

Range Detector Experiment

Range calorimeter measurements with ISDI sensor + scintillator stack.

12–13th April

images from sensor: User/Public/Document/EPIX/XCAP/data/20190512

images from dslr: User/Public/Document/Nikon/

  • full sensor area
  • shooting on BACK WINDOW
  • 0. finding the best beam intensity (proton)
  • Simon checking the intensity on pixels from dslr with nikon software
  • camera settings
    • exposure 1/2 sec
    • aperture f/3
    • ISO 200
Run number Full Well Mode Beam Energy (MeV/u) Range (estimated) N particles Spot size (mm) ion type DSLR file name Comments
N well mode Energy MeV/u Range particles Spot FWHM test dslr file name DSC_ comments
00 low None - None None - - background
01 high None - None None - - background
not saved from Laurent high None - None None - DSC_145 intensity check
none - - - - - - - Calibration : shoot through. no degrader
02 high 221.06 - 2*10^9 8.1 p DSC_147 shoot through no degrader
03 high 221.06 - 3.2*10^9 11.1 p DSC_149 shoot through no degrader. from now on exposure time on dslr 0.2 sec
04 high 221.06 - 3.2*10^9 20.0 p DSC_150 shoot through no degrader.
05 low 221.06 - 1.2*10^9 20.0 p DSC_151 shoot through no degrader. exposure time back to 0.5 sec
06 low 221.06 - 1.2*10^9 11.1 p DSC_152 shoot through no degrader.
07 low 221.06 - 1.2*10^9 8.1 p DSC_153 shoot through no degrader.
08 high 220.51 - 8*10^8 4.9 He DSC_155 shoot through no degrader. exposure 0.1 sec
09 high 220.51 - 8*10^8 8.1 He DSC_156 shoot through no degrader.
10 high 220.51 - 8*10^8 10.1 He DSC_157 shoot through no degrader.
11 high 430.1 - 8*10^7 3.4 C DSC_159 shoot through no degrader. ripple filter 3mm
12 high 430.1 - 8*10^7 7.8 C DSC_160 shoot through no degrader. ripple filter 3mm
13 high 430.1 - 8*10^7 20 C DSC_161 shoot through no degrader.ripple filter 3mm. exposure 0.5 sec
14 high 430.1 - 8*10^7 3.4 C DSC_162 shoot through. PMMA 5 cm
15 high 430.1 - 8*10^7 7.8 C DSC_163 shoot through. PMMA 5cm
16 high 430.1 - 8*10^7 20 C DSC_164 shoot through. PMMA 5cm
17 high 220.51 - 8*10^8 4.9 He DSC_165 shoot through. PMMA 5 cm. exposure 0.1
18 high 220.51 - 8*10^8 8.1 He DSC_166 shoot through. PMMA 5cm
19 high 220.51 - 8*10^8 10.1 He DSC_167 shoot through. PMMA 5cm
20 high 221.06 - 3.2*10^9 8.1 p DSC_168 shoot through. PMMA 5 cm. exposure 0.2
21 high 221.06 - 3.2*10^9 11.1 p DSC_169 shoot through. PMMA 5cm
22 high 221.06 - 3.2*10^9 20 p DSC_170 shoot through. PMMA 5cm
23 high 430.1 - 8*10^7 3.4 C DSC_172 shoot through. no absorber. exposure 0.1
24 high 430.1 - 8*10^7 7.8 C DSC_173 shoot through. no absorber
25 high 430.1 - 8*10^7 20 C DSC_175 shoot through. no absorber. exposure 0.2 sec
  • the case has been ROTEATED around. We now shoot on the FRONT window
Run number Full Well Mode Beam Energy (MeV/u) Range (estimated) N particles Spot size (mm) ion type DSLR file name Comments
N well mode Energy MeV/u Range particles Spot FWHM test dslr file name DSC_ comments
26 high 60.9 - 6*10^8 26.3 p DSC_176 front window Intensity chack. exposure 0.5 sec
27 high 60.8 - 2*10^8 15.4 He DSC_178 front window Intensity chack. exposure 0.5 sec
28 high 110.6 - 2*10^7 8.4 C DSC_180 front window Intensity chack. exposure 0.5 sec
29 high 430.1 - 8*10^7 3.4 C DSC_181 front window shoot through. no absorber. exposure 0.2 sec
none - - - - - - - Calibration : shoot through. no degrader
30 high 430.1 - 8*10^7 7.8 C DSC_182 shoot through. no absorber
31 high 430.1 - 8*10^7 20 C DSC_183 shoot through. no absorber.
32 high 221.06 - 3.2*10^9 20.0 p DSC_184 shoot through no degrader.
33 high 221.06 - 3.2*10^9 11.1 p DSC_185 shoot through no degrader.
34 high 221.06 - 3.2*10^9 8.1 p DSC_186 shoot through no degrader.
35 high 220.51 - 8*10^8 4.9 He DSC_187 shoot through no degrader. exposure 0.1 sec
36 high 220.51 - 8*10^8 8.1 He DSC_188 shoot through no degrader.
37 high 220.51 - 8*10^8 10.1 He DSC_190 shoot through no degrader.
38 high 220.51 - 8*10^8 4.9 He DSC_191 shoot through 5cm PMMA. exposure 0.1 sec
39 high 220.51 - 8*10^8 8.1 He DSC_192 shoot through 5cm PMMA.
40 high 220.51 - 8*10^8 10.1 He DSC_193 shoot through 5cm PMMA.
41 high 430.1 - 8*10^7 3.4 C DSC_194 front window shoot through. 5cm PMMA. exposure 0.2 sec
42 high 430.1 - 8*10^7 7.8 C DSC_195 shoot through. 5cm PMMA
43 high 430.1 - 8*10^7 20 C DSC_196 shoot through. 5cm PMMA.
44 high 221.06 - 3.2*10^9 8.1 p DSC_197 shoot through 5cm PMMA. exposure 0.2 sec
45 high 221.06 - 3.2*10^9 11.1 p DSC_198 shoot through 5cm PMMA.
46 high 221.06 - 3.2*10^9 20.0 p DSC_199 shoot through 5cm PMMA.
none - - - - - - - Test Focus
47 high 120.1 - 1.2*10^9 13.4 p DSC_201 about 10 cm range. exposure 0.1 sec
48 high 120.1 - 1.2*10^9 14.4 p DSC_202 about 10 cm range
49 high 120.1 - 1.2*10^9 15.4 p DSC_203 about 10 cm range
50 high 120.1 - 1.2*10^9 16.5 p DSC_204 about 10 cm range
51 high 120.1 - 1.2*10^9 19.2 p DSC_205 about 10 cm range
52 high 120.1 - 1.2*10^9 20.9 p DSC_206 about 10 cm range
53 high 120.42 - 3*10^8 8.1 He DSC_207 about 10 cm range. exposure 0.1 sec
54 high 120.4 - 3*10^8 8.9 He DSC_208 about 10 cm range
55 high 120.4 - 3*10^8 10.4 He DSC_209 about 10 cm range
56 high 120.4 - 3*10^8 12 He DSC_210 about 10 cm range
57 high 219.8 - 8*10^7 4.7 C DSC_211 about 10 cm range. exposure 0.1 sec
58 high 219.8 - 8*10^7 6.4 C DSC_212 about 10 cm range
59 high 219.8 - 8*10^7 8.5 C DSC_213 about 10 cm range
60 high 219.8 - 8*10^7 10.3 C DSC_214 about 10 cm range
61 high 219.8 - 8*10^7 15. C DSC_215 about 10 cm range
62 high 219.8 - 8*10^7 20. C DSC_216 about 10 cm range
none - - - - - - - WET of known absorbers
63 high 219.8 - 1.2*10^9 4.7 C DSC_217 2mm PMMA absorber. exposure 0.1 sec
64 high 120.42 - 3*10^8 8.1 He DSC_218 2mm PMMA absorber. exposure 0.1 sec
65 high 120.1 - 1.2*10^9 13.4 p DSC_219 2mm PMMA absorber. exposure 0.1 sec
66 high 120.1 - 1.2*10^9 13.4 p DSC_220 1mm PMMA absorber. exposure 0.1 sec
67 high 219.8 - 8*10^7 4.7 C DSC_222 1mm PMMA absorber. exposure 0.1 sec
68 high 120.42 - 3*10^8 8.1 He DSC_223 1mm PMMA absorber. exposure 0.1 sec
69 high 120.42 - 3*10^8 8.1 He DSC_224 5mm PMMA absorber. exposure 0.1 sec
70 high 120.1 - 1.2*10^9 13.4 p DSC_225 5mm PMMA absorber. exposure 0.1 sec
71 high 219.8 - 8*10^7 4.7 C DSC_226 5mm PMMA absorber. exposure 0.1 sec
72 high 219.8 - 8*10^7 4.7 C DSC_227 10mm PMMA absorber. exposure 0.1 sec
73 high 120.42 - 3*10^8 8.1 He DSC_228 10mm PMMA absorber. exposure 0.1 sec
74 high 120.1 - 1.2*10^9 13.4 p DSC_229 10mm PMMA absorber. exposure 0.1 sec
75 high 120.1 - 1.2*10^9 13.4 p DSC_230 20mm PMMA absorber. exposure 0.1 sec
76 high 219.8 - 8*10^7 4.7 C - 20mm PMMA absorber. DSLR out of charge
77 high 120.42 - 3*10^8 8.1 He - 20mm PMMA absorber. -
78 high 120.42 - 3*10^8 8.1 He - 50mm PMMA absorber. -
79 high 120.1 - 1.2*10^9 13.4 p - 50mm PMMA absorber.
80 high 219.8 - 8*10^7 4.7 C - 50mm PMMA absorber.
none - - - - - - - SOBP for protons: 10 cm deep 3cm plateau
81 high max 116.85 min 98.27 - 1.2*10^9 13.7 - 16 p - SOBP no absorber. n. of steps in the file sent by email at 3.10 am on 13 Apr 2019. sensor: 10 pix in the center
none - - - - - - - High proton energies
82 high - - - - - - background. sensor 10 px in the center
83 high 221.1 - 1.2*10^9 8.1 p - 20cm (5 + 2 + 1 + 2 + 5 + 5 cm) PMMA absorber. Corresponds to (5.9 + 2.274 + 1.177 + 2.271 + 5.901 + 5.764) cm WET = 23.287 cm WET
84 high 215.3 - 1.2*10^9 8.1 p - 20cm PMMA absorber. 23.287 cm WET
85 high 210.1 - 1.2*10^9 8.1 p - 20cm PMMA absorber. 23.287 cm WET
86 high 205.5 - 1.2*10^9 8.2 p - 20cm PMMA absorber. 23.287 cm WET
87 high 200.1 - 1.2*10^9 8.4 p - 20cm PMMA absorber. 23.287 cm WET
88 high 200.1 - 1.2*10^9 8.4 p - 12cm (5 + 5 + 2 cm) PMMA absorber. 13.936 cm WET
89 high 195.3 - 1.2*10^9 8.6 p - 12cm PMMA absorber. 13.936 cm WET
90 high 190.5 - 1.2*10^9 8.0 p - 12cm PMMA absorber. 13.936 cm WET
91 high 185.5 - 1.2*10^9 9.1 p - 12cm PMMA absorber. 13.936 cm WET
92 high 180.5 - 1.2*10^9 9.4 p - 12cm PMMA absorber. 13.936 cm WET
93 high 175.3 - 1.2*10^9 9.7 p - 12cm PMMA absorber. 13.936 cm WET
94 high 170.6 - 1.2*10^9 9.9 p - 12cm PMMA absorber. 13.936 cm WET
95 high 165.4 - 1.2*10^9 10.3 p - 12cm PMMA absorber. 13.936 cm WET
96 high 160.1 - 1.2*10^9 10.6 p - 12cm PMMA absorber. 13.936 cm WET
97 high 155.3 - 1.2*10^9 10.9 p - 12cm PMMA absorber. 13.936 cm WET
98 high 155.3 - 1.2*10^9 10.9 p - 5cm PMMA absorber. 5.764 cm WET
99 high 150.4 - 1.2*10^9 11.2 p - 5cm PMMA absorber. 5.764 cm WET
100 high 145.5 - 1.2*10^9 11.5 p - 5cm PMMA absorber. 5.764 cm WET
101 high 140.4 - 1.2*10^9 11.8 p - 5cm PMMA absorber. 5.764 cm WET
102 high 135.2 - 1.2*10^9 12.2 p - 5cm PMMA absorber. 5.764 cm WET
103 high 130.5 - 1.2*10^9 12.5 p - 5cm PMMA absorber. 5.764 cm WET
104 high 125.1 - 1.2*10^9 12.9 p - 5cm PMMA absorber. 5.764 cm WET
105 high 120.1 - 1.2*10^9 13.4 p - 5cm PMMA absorber. 5.764 cm WET
106 high 115.6 - 1.2*10^9 13.8 p - 5cm PMMA absorber. 5.764 cm WET
107 high 110.2 - 1.2*10^9 14.4 p - 5cm PMMA absorber. 5.764 cm WET
108 high 105.4 - 1.2*10^9 15. p - 5cm PMMA absorber. 5.764 cm WET. maybe missed
109 high 105.4 - 1.2*10^9 15. p - no absorber. maybe missed
110 high 100.5 - 1.2*10^9 15.7 p - no absorber.maybe missed
111 high 95.3 - 1.2*10^9 16.5 p - no absorber. maybe missed. Lairent saved as 111 a copy of 112
112 high 90.7 - 1.2*10^9 17.4 p - no absorber. Laurent saved for sure this
113 high 85.1 - 1.2*10^9 18.5 p - no absorber. maybe missed
114 high 80.04 - 1.2*10^9 19.8 p - no absorber. maybe missed. Laurent saved as 114 a copy of 115
115 high 48.1 - 1.2*10^9 32.4 p - no absorber. Laurent surely saved this
  • OXYGEN
Run number Full Well Mode Beam Energy (MeV/u) Range (estimated) N particles Spot size (mm) ion type DSLR file name Comments
N well mode Energy MeV/u Range particles Spot FWHM test dslr file name DSC_ comments
116 high 231.4 - 4.*10^7 4.3 O - Intensity test 5cm absorber (absorber n 3)
117 low 231.4 - 4.*10^7 4.3 O - Intensity test 5cm absorber (absorber n 3)
118 low 231.4 - 1.5*10^7 4.3 O - Intensity test 5cm absorber (absorber n 3)
119 low 231.4 - 2.5*10^7 4.3 O - Intensity test 5cm absorber(absorber n 3)
120 low 430.32 - 2.5*10^7 2.7 O - shoot-through with 5cm absorber (absorber n 3)
121 low 430.32 - 2.5*10^7 2.7 O - shoot-through no absorber
122 low 261.1 - 2.5*10^7 3.9 O - range calibration no absorber
123 low 245.7 - 2.5*10^7 4.1 O - range calibration no absorber
124 low 231.4 - 1.5*10^7 4.3 O - range calibration no absorber
125 low 214.7 - 1.5*10^7 4.5 O - range calibration no absorber
126 low 200.9 - 2.5*10^7 4.8 O - range calibration no absorber
127 low 200.9 - 1.5*10^7 4.8 O - range calibration no absorber
128 low 184.5 - 1.5*10^7 5.2 O - range calibration no absorber
129 low 169 - 1.5*10^7 5.6 O - range calibration no absorber
130 low 150.2 - 1.5*10^7 6.3 O - range calibration no absorber
131 low 124.7 - 1.5*10^7 7.5 O - range calibration no absorber
132 low 103.8 - 1.5*10^7 8.8 O - range calibration no absorber
133 low 233 - 1.5*10^7 4.3 O - range calibration no absorber
134 low 234.62 - 1.5*10^7 4.2 O - range calibration no absorber
135 low 236.24 - 1.5*10^7 4.2 O - range calibration no absorber
136 low 237.83 - 1.5*10^7 4.2 O - range calibration no absorber
137 low 239.42 - 1.5*10^7 4.2 O - range calibration no absorber
138 low 241 - 1.5*10^7 4.2 O - range calibration no absorber
139 low 242.58 - 1.5*10^7 4.1 O - range calibration no absorber
140 low 244.15 - 1.5*10^7 4.1 O - range calibration no absorber
141 low 245.71 - 1.5*10^7 4.1 O - range calibration no absorber
142 low 247.26 - 1.5*10^7 4.1 O - range calibration no absorber
143 low 248.83 - 1.5*10^7 4.1 O - range calibration no absorber
144 low 252.0 - 1.5*10^7 4.0 O - range calibration no absorber
145 low 253.54 - 1.5*10^7 4.0 O - range calibration no absorber
146 low - - - - - - background



13–14th April

  • the detector has been Disassembled and assembled in the afternoon
  • full sensor area
  • shooting on BACK WINDOW
  • images from sensor: User/Public/Document/EPIX/XCAP/data/20190413
  • finding the best beam intensity
  • Simon checking the intensity on pixels from dslr with nikon software
  • camera settings
    • exposure 1/10 sec (can change during runs)
    • aperture f/3
    • ISO 200
Run number Full Well Mode Beam Energy (MeV/u) Range (estimated) N particles Spot size (mm) ion type DSLR file name Comments
N well mode Energy MeV/u Range particles Spot FWHM type dslr file name DSC_ comments
00 low None - None None - DSC_231 background
01 high None - None None - - background
none - - - - - - - Shoot-through calibration
02 high 220.51 - 8x10^8 4.9 He DSC_232 shoot through 5cm PMMA. exposure 0.1 sec
03 high 430.1 - 8x10^7 3.4 C DSC_233 shoot through 5cm PMMA. exposure 0.1 sec
04 low 430.1 - 8x10^7 3.4 C DSC_234 movie shoot through 5cm PMMA. exposure 1/80 sec ISO 1600
05 low 430.1 - 3x10^7 3.4 C DSC_235 shoot through 5cm PMMA. exposure 0.2 sec ISO 200
06 low 220.51 - 3x10^8 4.9 He DSC_236 shoot through 5cm PMMA. exposure 0.2 sec


  • shooting on FRONT WINDOW
  • camera OFF
Run number Full Well Mode Beam Energy (MeV/u) Range (estimated) N particles Spot size (mm) ion type DSLR file name Comments
N well mode Energy MeV/u Range particles Spot FWHM type dslr file name DSC_ comments
07 low None - None None - OFF background
08 high None - None None - - background
none - - - - - - - Shoot-through calibration
09 high 220.51 - 8x10^8 4.9 He - shoot through 5cm PMMA.
10 high 430.1 - 8x10^7 3.4 C - shoot through 5cm PMMA.
11 low 430.1 - 3x10^7 3.4 C - shoot through 5cm PMMA.
12 low 220.51 - 3x10^8 4.9 He - shoot through 5cm PMMA.
none - - - - - - - Carbon and Helium SOBP and single energy pencil beam
13 low None - None None - - background
14 high None - None None - - background
15 high max 210 min 172 - 8*10^7 9.1 - 10.4 C - SOBP no absorber. sensor: 6 pix in the center. 16 energy layers. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/sobp_30x30x30/12C/ucl-sobp_c-2Gy_30x30x30mm3-75mm.xml 3mm Ripple filter always IN for SOBP
16 high approx max 210 min 172 - 8*10^8 10.2 - 8.7 He - SOBP no absorber. sensor: 6 pix in the center. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/he-contamination_ucl-sobp_c-2Gy_30x30x30mm3-75mm.xml Problem with the total dose a factor 10 higher than C.3mm Ripple filter always IN for SOBP
17 high approx max 210 min 172 - 8*10^7 10.2 - 8.7 He - SOBP no absorber. sensor: 6 pix in the center. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/he-contamination_ucl-sobp_c-2Gy_30x30x30mm3-75mm.xml. Too long but saved. Problem with the total dose a factor 10 higher than C. 3mm Ripple filter always IN for SOBP
18 high approx max 210 min 172 - 8*10^7 10.2 - 8.7 He - SOBP no absorber. sensor: 6 pix in the center. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/he-contamination_ucl-sobp_c-2Gy_30x30x30mm3-75mm_2Gy.xml NEW FILE *_2Gy respect to the previous. 3mm Ripple filter always IN for SOBP
19 high 220.51 - 8x10^7 4.9 He - pencil beam. no absorber. full sensor
20 low 220.51 - 8x10^7 4.9 He - pencil beam. no absorber. full sensor
21 low 219.8 - 8x10^7 4.7 C - pencil beam. no absorber. full sensor
22 high 219.8 - 8x10^7 4.7 C - pencil beam. no absorber. full sensor
23 low approx max 210 min 172 - 8*10^7 10.2 - 8.7 He - SOBP no absorber. sensor: 6 pix in the center. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/he-contamination_ucl-sobp_c-2Gy_30x30x30mm3-75mm_2Gy.xml
24 low approx max 210 min 172 - 8*10^7 10.2 - 8.7 He - SOBP 19 cm PMMA (5+5+5+2+2 cm). sensor: 6 pix in the center. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/he-contamination_ucl-sobp_c-2Gy_30x30x30mm3-75mm_2Gy.xml
25 low max 210 min 172 - 8*10^7 9.1 - 10.4 C - SOBP 19 cm PMMA (5+5+5+2+2 cm). sensor: 6 pix in the center. 16 energy layers. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/sobp_30x30x30/12C/ucl-sobp_c-2Gy_30x30x30mm3-75mm.xml
26 high max 210 min 172 - 8*10^7 9.1 - 10.4 C - SOBP 19 cm PMMA (5+5+5+2+2 cm). sensor: 6 pix in the center. 16 energy layers. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/sobp_30x30x30/12C/ucl-sobp_c-2Gy_30x30x30mm3-75mm.xml
27 high approx max 210 min 172 - 8*10^7 10.2 - 8.7 He - SOBP 19 cm PMMA (5+5+5+2+2 cm). sensor: 6 pix in the center. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/he-contamination_ucl-sobp_c-2Gy_30x30x30mm3-75mm_2Gy.xml
28 high 219.8 - 8x10^7 4.7 C - pencil beam. 19 cm PMMA (5+5+5+2+2 cm). full sensor
29 high 220.51 - 8x10^7 4.9 He - pencil beam. 19 cm PMMA (5+5+5+2+2 cm). full sensor
30 low 220.51 - 8x10^7 4.9 He - pencil beam. 19 cm PMMA (5+5+5+2+2 cm). full sensor
31 low 219.8 - 8x10^7 4.7 C - pencil beam. 19 cm PMMA (5+5+5+2+2 cm). full sensor
32 low approx max 210 min 172 - 8*10^7 10.2 - 8.7 He - SOBP 15 cm PMMA (5+5+5 cm). Removed 2+2 cm PMMA: WET1= 2.271 + WET2 = 2.279 sensor: 6 pix in the center. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/he-contamination_ucl-sobp_c-2Gy_30x30x30mm3-75mm_2Gy.xml
33 low max 210 min 172 - 8*10^7 9.1 - 10.4 C - SOBP 15 cm PMMA (5+5+5 cm). sensor: 6 pix in the center. 16 energy layers. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/sobp_30x30x30/12C/ucl-sobp_c-2Gy_30x30x30mm3-75mm.xml
34 high max 210 min 172 - 8*10^7 9.1 - 10.4 C - SOBP 15 cm PMMA (5+5+5 cm). sensor: 6 pix in the center. 16 energy layers. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/sobp_30x30x30/12C/ucl-sobp_c-2Gy_30x30x30mm3-75mm.xml
35 high approx max 210 min 172 - 8*10^7 10.2 - 8.7 He - SOBP 15 cm PMMA (5+5+5 cm). sensor: 6 pix in the center. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/he-contamination_ucl-sobp_c-2Gy_30x30x30mm3-75mm_2Gy.xml
36 high 219.8 - 8x10^7 4.7 C - pencil beam. 15 cm PMMA (5+5+5 cm). full sensor
37 high 220.51 - 8x10^7 4.9 He - pencil beam. 15 cm PMMA (5+5+5 cm). full sensor
38 low 220.51 - 8x10^7 4.9 He - pencil beam. 15 cm PMMA (5+5+5 cm). full sensor
39 low 219.8 - 8x10^7 4.7 C - pencil beam. 15 cm PMMA (5+5+5 cm). full sensor
40 low approx max 210 min 172 - 8*10^7 10.2 - 8.7 He - SOBP 10 cm PMMA (5+5 cm). Removed 5cm PMMA WET= 5.764 cm sensor: 6 pix in the center. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/he-contamination_ucl-sobp_c-2Gy_30x30x30mm3-75mm_2Gy.xml
41 low max 210 min 172 - 8*10^7 9.1 - 10.4 C - SOBP 10 cm PMMA (5+5 cm). sensor: 6 pix in the center. 16 energy layers. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/sobp_30x30x30/12C/ucl-sobp_c-2Gy_30x30x30mm3-75mm.xml
42 high max 210 min 172 - 8*10^7 9.1 - 10.4 C - SOBP 10 cm PMMA (5+5 cm). sensor: 6 pix in the center. 16 energy layers. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/sobp_30x30x30/12C/ucl-sobp_c-2Gy_30x30x30mm3-75mm.xml
43 high approx max 210 min 172 - 8*10^7 10.2 - 8.7 He - SOBP 10 cm PMMA (5+5 cm). sensor: 6 pix in the center. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/he-contamination_ucl-sobp_c-2Gy_30x30x30mm3-75mm_2Gy.xml
44 high 219.8 - 8x10^7 4.7 C - pencil beam. 10 cm PMMA (5+5 cm). full sensor
45 high 220.51 - 8x10^7 4.9 He - pencil beam. 10 cm PMMA (5+5 cm). full sensor
46 low 220.51 - 8x10^7 4.9 He - pencil beam. 10 cm PMMA (5+5 cm). full sensor
47 low 219.8 - 8x10^7 4.7 C - pencil beam. 10 cm PMMA (5+5 cm). full sensor
48 low approx max 210 min 172 - 8*10^7 10.2 - 8.7 He - SOBP 5 cm PMMA (WET = 5.9 cm). Removed 5cm PMMA WET = 5.901 cm. sensor: 6 pix in the center. C/Workplaces/HIT-Exp/Seco/Lennar/20190412/he-contamination_ucl-sobp_c-2Gy_30x30x30mm3-75mm_2Gy.xml
49 low max 210 min 172 - 8*10^7 9.1 - 10.4 C - SOBP 5 cm PMMA. sensor: 6 pix in the center. 16 energy layers. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/sobp_30x30x30/12C/ucl-sobp_c-2Gy_30x30x30mm3-75mm.xml
50 high max 210 min 172 - 8*10^7 9.1 - 10.4 C - SOBP 5 cm PMMA. sensor: 6 pix in the center. 16 energy layers. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/sobp_30x30x30/12C/ucl-sobp_c-2Gy_30x30x30mm3-75mm.xml
51 high approx max 210 min 172 - 8*10^7 10.2 - 8.7 He - SOBP 5 cm PMMA. sensor: 6 pix in the center. C/Workplaces/HIT-Exp/Seco/Lennart/20190412/he-contamination_ucl-sobp_c-2Gy_30x30x30mm3-75mm_2Gy.xml
52 high 219.8 - 8x10^7 4.7 C - pencil beam. 5 cm PMMA. full sensor
53 high 220.51 - 8x10^7 4.9 He - pencil beam. 5 cm PMMA. full sensor
54 low 220.51 - 8x10^7 4.9 He - pencil beam. 5 cm PMMA. full sensor
55 low 219.8 - 8x10^7 4.7 C - pencil beam. 5 cm PMMA. full sensor
56 low None - None None - OFF background
none - - - - - - - Variable air gap measurements
57 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 1mm x 0mm air gap width. + sheets 2mm + 5mm + 1 cm +2cm +2cm + 5cm +5cm PMMA. full sensor
58 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 1mm x 0mm air gap width. + sheets 2mm + 5mm + 1 cm +2cm +2cm + 5cm +5cm PMMA. full sensor
59 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA (WET 5.364 cm) upstream, pair 1mm (WET 0.112 cm) x 0mm air gap width. + sheets 2mm (WET 0.25 cm ) + 5mm (WET 0.582 cm) + 1 cm (WET 1.177 cm) +2cm (WET 2.271 cm) + 5cm (WET 5.901 cm) +5cm PMMA (WET 5.9 cm). full sensor
60 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 1mm x 0mm air gap width. + sheets 2mm + 5mm + 1 cm +2cm + 5cm +5cm PMMA. full sensor
61 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 1mm x 2mm air gap width. + sheets 2mm + 5mm + 1 cm +2cm + 5cm +5cm PMMA. full sensor
62 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 1mm x 2mm air gap width. + sheets 2mm + 5mm + 1 cm +2cm + 5cm +5cm PMMA. full sensor
63 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 1mm x 5mm air gap width. + sheets 2mm + 5mm + 1 cm +2cm + 5cm +5cm PMMA. full sensor
64 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 1mm x 5mm air gap width. + sheets 2mm + 5mm + 1 cm +2cm + 5cm +5cm PMMA. full sensor
65 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 1mm x 10mm air gap width. + sheets 2mm + 5mm + 1 cm +2cm + 5cm +5cm PMMA. full sensor
66 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 1mm x 10mm air gap width. + sheets 2mm + 5mm + 1 cm +2cm + 5cm +5cm PMMA. full sensor
67 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 2mm x 0mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
68 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 2mm x 0mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
69 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 2mm x 2mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
70 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 2mm x 2mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor. System interlok. Don't use it.
71 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 2mm x 2mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
72 low 220.51 - 8x10^7 4.9 He - pencil beam. 5cm PMMA upstream, pair 2mm x 2mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
73 low 219.8 - 8x10^7 4.7 C - pencil beam. 5cm PMMA upstream, pair 2mm x 2mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
74 low 219.8 - 8x10^7 4.7 C - pencil beam. 5cm PMMA upstream, pair 2mm x 0mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
75 low 220.51 - 8x10^7 4.9 He - pencil beam. 5cm PMMA upstream, pair 2mm x 0mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
76 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 2mm x 5mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
77 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 2mm x 5mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
78 low 219.8 - 8x10^7 4.7 C - pencil beam. 5cm PMMA upstream, pair 2mm x 5mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
79 low 220.51 - 8x10^7 4.9 He - pencil beam. 5cm PMMA upstream, pair 2mm x 5mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
80 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 2mm x 10mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
81 low 219.8 - 8x10^7 4.7 C - pencil beam. 5cm PMMA upstream, pair 2mm x 10mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
82 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 2mm x 10mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
83 low 220.51 - 8x10^7 4.9 He - pencil beam. 5cm PMMA upstream, pair 2mm x 10mm air gap width. + sheets 5mm + 1 cm +2cm + 1mm + 5cm +5cm PMMA. full sensor
84 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 5mm x 0mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
85 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 5mm x 0mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
86 low 219.8 - 8x10^7 4.7 C - pencil beam. 5cm PMMA upstream, pair 5mm x 0mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
87 low 220.51 - 8x10^7 4.9 He - pencil beam. 5cm PMMA upstream, pair 5mm x 0mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
88 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 5mm x 2mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
89 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 5mm x 2mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
90 low 219.8 - 8x10^7 4.7 C - pencil beam. 5cm PMMA upstream, pair 5mm x 2mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
91 low 220.51 - 8x10^7 4.9 He - pencil beam. 5cm PMMA upstream, pair 5mm x 2mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
92 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 5mm x 5mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
93 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 5mm x 5mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
94 low 219.8 - 8x10^7 10.3 C - pencil beam. 5cm PMMA upstream, pair 5mm x 5mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
95 low 219.8 - 8x10^7 6.4 C - pencil beam. 5cm PMMA upstream, pair 5mm x 5mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
96 low 219.8 - 8x10^7 4.7 C - pencil beam. 5cm PMMA upstream, pair 5mm x 5mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
97 low 220.51 - 8x10^7 10.1 He - pencil beam. 5cm PMMA upstream, pair 5mm x 5mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
98 low 220.51 - 8x10^7 6.1 He - pencil beam. 5cm PMMA upstream, pair 5mm x 5mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
99 low 220.51 - 8x10^7 4.9 He - pencil beam. 5cm PMMA upstream, pair 5mm x 5mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
100 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 5mm x 10mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
101 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 5mm x 10mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
102 low 219.8 - 8x10^7 4.7 C - pencil beam. 5cm PMMA upstream, pair 5mm x 10mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
103 low 220.51 - 8x10^7 4.9 He - pencil beam. 5cm PMMA upstream, pair 5mm x 10mm air gap width. + sheets 1 cm +2cm + 1mm + 2mm + 5cm +5cm PMMA. full sensor
104 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 10mm (left beam view: 1.07 cm - WET 1.177 ) - (right: 0.97 mm + 0.1 mm WET = 1.124 + ? ) x 0mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
105 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 10mm x 0mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
106 low 219.8 - 8x10^7 4.7 C - pencil beam. 5cm PMMA upstream, pair 10mm x 0mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
107 low 220.51 - 8x10^7 4.9 He - pencil beam. 5cm PMMA upstream, pair 10mm x 0mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
108 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 10mm x 2mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
109 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 10mm x 2mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
110 low 219.8 - 8x10^7 4.7 C - pencil beam. 5cm PMMA upstream, pair 10mm x 2mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
111 low 220.51 - 8x10^7 4.9 He - pencil beam. 5cm PMMA upstream, pair 10mm x 2mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
112 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 10mm x 5mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
113 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 10mm x 5mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
114 low 219.8 - 8x10^7 4.7 C - pencil beam. 5cm PMMA upstream, pair 10mm x 5mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
115 low 220.51 - 8x10^7 4.9 He - pencil beam. 5cm PMMA upstream, pair 10mm x 5mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
116 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA upstream, pair 10mm x 10mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
117 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA upstream, pair 10mm x 10mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
118 low 219.8 - 8x10^7 4.7 C - pencil beam. 5cm PMMA upstream, pair 10mm x 10mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
119 low 220.51 - 8x10^7 4.9 He - pencil beam. 5cm PMMA upstream, pair 10mm x 10mm air gap width. + sheets +2cm + 1mm + 2mm + 5mm + 5cm +5cm PMMA. full sensor
120 low None - None None - OFF background. full sensor
121 low 220.51 - 8x10^7 8.1 He - pencil beam. 5cm PMMA (WET 5.364 cm) + 1 cm (WET 1.177 cm) + 1mm (WET 0.112 cm)+ 2mm (WET 0.25 cm ) + 5cm (WET 5.901 cm) +5cm PMMA (WET 5.9 cm) + 5mm pair (WET 0.582 cm 0.562) 5mm air gap +2cm (WET 2.274 cm). full sensor
122 low 219.8 - 8x10^7 8.5 C - pencil beam. 5cm PMMA + 1 cm + 1mm + 2mm + 5cm +5cm PMMA + 5mm pair with 5mm air gap +2cm . full sensor
123 low 219.8 - 8x10^7 4.7 C - pencil beam. 5cm PMMA + 1 cm + 1mm + 2mm + 5cm +5cm PMMA + 5mm pair with 5mm air gap +2cm. full sensor
124 low 220.51 - 8x10^7 4.9 He - pencil beam. 5cm PMMA + 1 cm + 1mm + 2mm + 5cm +5cm PMMA + 5mm pair with 5mm air gap +2cm. full sensor


125 low None - None None - OFF background. sensor readout 100 px. wrong horizontal offset in XCAP software
126 low 210 - 8x10^7 10.2 He _238 movie trasverse scan SOBP 1 layer energy. 3cmx3cm, 100 spots. 5cm PMMA (WET 5.364 cm) + 2mm (full in) + 1 cm (WET 1.177 cm) + 1mm + 5cm (WET 5.901 cm) +5cm PMMA (WET 5.9 cm) + 5mm (WET 0.583 cm 0.562) +2cm (WET 2.274 cm). full sensor wrong horizontal offset in XCAP software. setting 25 frames/sec. shutter speed 1/25 sec aperfure f/3 ISO 2000
127 low 210 - 8x10^7 10.2 C - SOBP 1 layer energy. 3cmx3cm, 100 spots. 5cm PMMA + 2mm + 1 cm + 1mm + 5cm +5cm PMMA + 5mm +2cm . full sensor. setting 25 frames/sec wrong horizontal offset in XCAP software.
128 low 210 - 8x10^7 10.2 C 239 SOBP 1 layer energy. 3cmx3cm, 100 spots. 5cm PMMA + 2mm + 1 cm + 1mm + 5cm +5cm PMMA + 5mm +2cm . full sensor. offset adjusted. setting 25 frames/sec.
129 low 210 - 8x10^7 10.2 He SOBP 1 layer energy. 3cmx3cm, 100 spots. 5cm PMMA + 2mm + 1 cm + 1mm + 5cm +5cm PMMA + 5mm +2cm . full sensor. offset adjusted. setting 25 frames/sec.
130 low None - None None - - background. sensor readout 100 px. offset adjusted
131 low 210 - 8x10^7 10.2 He _240 trasverse scan SOBP 1 layer energy. 3cmx3cm, 100 spots. 5cm PMMA + 2mm (8mm further in than half inserted from the left. air gap on the right) + 1 cm + 1mm + 5cm +5cm PMMA + 5mm +2cm.
132 low 210 - 8x10^7 10.2 C _242 trasverse scan SOBP 1 layer energy. 3cmx3cm, 100 spots. 5cm PMMA + 2mm (8mm further in than half inserted from the left. air gap on the right) + 1 cm + 1mm + 5cm +5cm PMMA + 5mm +2cm.
133 low 210 - 8x10^7 10.2 C _243 trasverse scan SOBP 1 layer energy. 3cmx3cm, 100 spots. 5cm PMMA + 2mm (half inserted.) + 1 cm + 1mm + 5cm +5cm PMMA + 5mm +2cm. ISO 2000
134 low 210 - 8x10^7 10.2 He _244 trasverse scan SOBP 1 layer energy. 3cmx3cm, 100 spots. 5cm PMMA + 2mm (half inserted.) + 1 cm + 1mm + 5cm +5cm PMMA + 5mm +2cm. ISO 2000
none low 210 - 8x10^7 10.2 He _245 trasverse scan SOBP 1 layer energy. 3cmx3cm, 100 spots. 5cm PMMA + 2mm (half inserted.) + 1 cm + 1mm + 5cm +5cm PMMA + 5mm +2cm. ISO 8000
none low 210 - 8x10^7 10.2 C _247 trasverse scan SOBP 1 layer energy. 3cmx3cm, 100 spots. 5cm PMMA + 2mm (half inserted.) + 1 cm + 1mm + 5cm +5cm PMMA + 5mm +2cm. ISO 8000
135 low 210 - 8x10^7 10.2 C _248 trasverse scan SOBP 1 layer energy. 3cmx3cm, 100 spots. 5cm PMMA + 2mm (8mm pulled out.) + 1 cm + 1mm + 5cm +5cm PMMA + 5mm +2cm. ISO 8000
136 low 210 - 8x10^7 10.2 He _249 trasverse scan SOBP 1 layer energy. 3cmx3cm, 100 spots. 5cm PMMA + 2mm (8mm pulled out.) + 1 cm + 1mm + 5cm +5cm PMMA + 5mm +2cm. ISO 8000
137 low 210 - 8x10^7 10.2 He _250 trasverse scan SOBP 1 layer energy. 3cmx3cm, 100 spots. 5cm PMMA + 2mm gap (pulled out.) + 1 cm + 1mm + 5cm +5cm PMMA + 5mm +2cm. ISO 8000
138 low 210 - 8x10^7 10.2 C _251 trasverse scan SOBP 1 layer energy. 3cmx3cm, 100 spots. 5cm PMMA + 2mm gap (pulled out.) + 1 cm + 1mm + 5cm +5cm PMMA + 5mm +2cm. ISO 8000
139 low 210 - 8x10^7 10.2 He _253 moving platform. SOBP 10x1 spot array (3cm wide). upstream PMMA absorber 5cm (WET 5.364 cm); 5mm air gap; downstream PMMA absorber 13.3cm. ISO 3200
140 low 210 - 8x10^7 10.2 He _254 moving platform. SOBP 10x1 spot array (3cm wide). upstream PMMA absorber 5cm; 5mm air gap; downstream PMMA absorber 13.3cm. ISO 3200
141 low 210 - 8x10^7 10.2 He _255 moving platform. SOBP 10x1 spot array (3cm wide). upstream PMMA absorber 5cm; 5mm air gap; downstream PMMA absorber 13.3cm. ISO 3200. Moving platform video run01 on Raffy's phone
142 low 210 - 8x10^7 10.2 He _256 moving platform. SOBP 10x1 spot array (3cm wide). upstream PMMA absorber 5cm; 5mm air gap; downstream PMMA absorber 13.3cm. ISO 3200. Moving platform video run02 on Raffy's phone
143 low 210 - 8x10^7 10.2 He _257 moving platform. SOBP 10x1 spot array (3cm wide). upstream PMMA absorber 5cm; 5mm air gap; downstream PMMA absorber 13.3cm. ISO 3200 moving platform Simon video
144 low 210 - 8x10^7 10.2 He _258 SOBP 10x10 single layer. upstream PMMA absorber 5cm (WET 5.364 cm); 2mm air gap oval shape 3cm w x 1cm h; downstream PMMA absorber 13.6cm PMMA. ISO 3200
145 low 210 - 8x10^7 10.2 He _259 SOBP 10x10 single layer. upstream PMMA absorber 5cm; 2mm (1mm + 1mm) air gap oval shape 3cm w x 1cm h; downstream PMMA absorber 13.6cm PMMA. ISO 8000
146 low 210 - 8x10^7 10.2 C _260 SOBP 10x10 single layer. upstream PMMA absorber 5cm; 2mm air gap oval shape 3cm w x 1cm h; downstream PMMA absorber 13.6 cm PMMA.
147 low 220.5 - 8x10^7 8.1 He pencil beam. upstream PMMA absorber 5cm; 2mm air gap oval shape 3cm w x 1cm h centered with the beam; downstream PMMA absorber 13.6 cm PMMA.
148 low 220.5 - 8x10^7 8.1 He pencil beam. upstream PMMA absorber 5cm; 2mm air gap oval shape 3cm w x 1cm h 1.5 cm shifted to the right from beam eye view. gap edge in the midle of the beam; downstream PMMA absorber 13.6 cm PMMA.
149 low 219.8 - 8x10^7 8.5 C pencil beam. upstream PMMA absorber 5cm; 2mm air gap oval shape 3cm w x 1cm h 1.5 cm shifted to the right drom beam eye view. gap edge in the midle of the beam; downstream PMMA absorber 13.6 cm PMMA.
150 low 219.8 - 8x10^7 8.5 C pencil beam. upstream PMMA absorber 5cm; 2mm air gap oval shape 3cm w x 1cm h 3cm cm shifted to the right. downstream PMMA absorber 13.6 cm PMMA.
151 low 220.5 - 8x10^7 8.1 He pencil beam. upstream PMMA absorber 5cm; 2mm air gap oval shape 3cm w x 1cm h 3 cm shifted to the right from beam eye view. downstream PMMA absorber 13.6 cm PMMA.
152 low 219.8 - 8x10^7 8.5 C pencil beam. upstream PMMA absorber 5cm; 2mm air gap oval shape 3cm w x 1cm h centered. downstream PMMA absorber 13.6 cm PMMA.
153 low 219.8 - 8x10^7 8.5 C pencil beam. upstream PMMA absorber 5cm; 2mm air gap oval shape 3cm w x 1cm h 1.5 cm cm shifted to the left for . downstream PMMA absorber 13.6 cm PMMA.
154 low 220.5 - 8x10^7 8.1 He pencil beam. upstream PMMA absorber 5cm; 2mm air gap oval shape 3cm w x 1cm h 1.5 cm shifted to the left from beam eye view. downstream PMMA absorber 13.6 cm PMMA.
155 low 220.5 - 8x10^7 8.1 He pencil beam. upstream PMMA absorber 5cm; 2mm air gap oval shape 3cm w x 1cm h 3 cm shifted to the left from beam eye view. downstream PMMA absorber 13.6 cm PMMA.
156 low 219.8 - 8x10^7 8.5 C pencil beam. upstream PMMA absorber 5cm; 2mm air gap oval shape 3cm w x 1cm h 3 cm cm shifted to the left for . downstream PMMA absorber 13.6 cm PMMA.