Proton Calorimetry/Meetings/2020/05/06: Difference between revisions

From PBTWiki
Jump to navigation Jump to search
Line 14: Line 14:
*Started research into FPGA programming:
*Started research into FPGA programming:
**Some basic theory of logic gates, LUTs, Flip-flops etc.
**Some basic theory of logic gates, LUTs, Flip-flops etc.
**Ran the hardware-version of 'Hello World' on Zybo: program the board to blink an LED.
**Ran hardware-version of 'Hello World' on Zybo: program board to blink an LED.
*Laurent will get in touch with Stephan Brons about HIT FLUKA curves for He, C and O beams.
*Laurent will get in touch with Stephan Brons about HIT FLUKA curves for He, C and O beams.
*Laurent suggested that analysis of x-axis profile of beam is possible with CMOS sensor – could be worth investigating.
*Laurent suggested that analysis of x-axis profile of beam is possible with CMOS sensor – could be worth investigating.


=== [[ELogs/LaurentKelleter|Laurent Kelleter]] ===
=== [[ELogs/LaurentKelleter|Laurent Kelleter]] ===

Revision as of 14:19, 6 May 2020

Minutes for UCL Proton Calorimetry Meetings, 6th May (Everyone is working from home)

Present

Laurent Kelleter, Saad Shaikh, Raffaella radogna

Raffaella Radogna

Saad Shaikh

  • Set up parallel GEANT4 project from a basic example to rebuild Laurent's simulation from scratch.
  • Analysed SOBP data from HIT 12th April 2019, was able to successfully fit data but realised that data acquisition missed some of the beam delivery. Shown in this this presentation.
    • Moved away from current binned fitting implementation, in favour of ROOT's fitting option "I" and using smooth QB function to fit data. Fit speed roughly the same. Note: SOBP fit fails with this option, but fit results are fine without it. SOBP fit takes ~10mins with original binned fit implementation, takes 10s with smooth QB fit.
  • Started research into FPGA programming:
    • Some basic theory of logic gates, LUTs, Flip-flops etc.
    • Ran hardware-version of 'Hello World' on Zybo: program board to blink an LED.
  • Laurent will get in touch with Stephan Brons about HIT FLUKA curves for He, C and O beams.
  • Laurent suggested that analysis of x-axis profile of beam is possible with CMOS sensor – could be worth investigating.

Laurent Kelleter