Proton Calorimetry/Meetings/2020/06/17: Difference between revisions

From PBTWiki
Jump to navigation Jump to search
Line 13: Line 13:
* Old MacBook Pro died – spent a lot of time transferring data and setting up on DAQ laptop.
* Old MacBook Pro died – spent a lot of time transferring data and setting up on DAQ laptop.
* Using Xilinx Clocking Wizard to generate different clock frequencies – still testing this.
* Using Xilinx Clocking Wizard to generate different clock frequencies – still testing this.
* Need to finish serial interface example project.
* Need to finish serial UART interface example project.
* Need to convert UCF constraints file provided by TI to XDC in order to use in Vivado.
* Need to convert UCF constraints file provided by TI to XDC in order to use in Vivado.


=== [[ELogs/LaurentKelleter|Laurent Kelleter]] ===
=== [[ELogs/LaurentKelleter|Laurent Kelleter]] ===

Revision as of 16:17, 17 June 2020

Minutes for UCL Proton Calorimetry Meetings, 17th June (Everyone is working from home)

Present

Simon Jolly, Laurent Kelleter, Saad Shaikh, Raffaella Radogna

Raffaella Radogna

  • Installed Xilinx - Vivado Design Suite on Windows
    • Matt Warren generated the license key
  • Provided comments for Laurent's chapter 9, chapter 2, Abstract, and Introduction.

Saad Shaikh

  • Old MacBook Pro died – spent a lot of time transferring data and setting up on DAQ laptop.
  • Using Xilinx Clocking Wizard to generate different clock frequencies – still testing this.
  • Need to finish serial UART interface example project.
  • Need to convert UCF constraints file provided by TI to XDC in order to use in Vivado.

Laurent Kelleter