Proton Calorimetry/Meetings/2020/07/15: Difference between revisions

From PBTWiki
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 8: Line 8:
*Interfaced DDC232 code with a UART transmitter, discussed UART interface in [http://www.hep.ucl.ac.uk/pbt/wikiData/presentations/2020/SS150720_UART_SIM.pptx this presentation].
*Interfaced DDC232 code with a UART transmitter, discussed UART interface in [http://www.hep.ucl.ac.uk/pbt/wikiData/presentations/2020/SS150720_UART_SIM.pptx this presentation].
*DDC232 code & UART interface work as intended in simulation.
*DDC232 code & UART interface work as intended in simulation.
*Design works in hardware: able to see output from DDC232/FPGA on PC.
*Design works in hardware! Able to see output from DDC232/FPGA on PC.
**Will now need to verify that output is correct.
**Will now need to verify that output is correct.
**Next step is to automate saving data to a .txt file.
**Next step is then to automate saving data to a .txt file.


=== [[ELogs/RaffaellaRadogna|Raffaella Radogna]] ===
=== [[ELogs/RaffaellaRadogna|Raffaella Radogna]] ===

Latest revision as of 21:41, 15 July 2020

Minutes for UCL Proton Calorimetry Meetings, 15th July

Present

Simon Jolly, Saad Shaikh, Raffaella Radogna, Fern Pannell

Saad Shaikh

  • Interfaced DDC232 code with a UART transmitter, discussed UART interface in this presentation.
  • DDC232 code & UART interface work as intended in simulation.
  • Design works in hardware! Able to see output from DDC232/FPGA on PC.
    • Will now need to verify that output is correct.
    • Next step is then to automate saving data to a .txt file.

Raffaella Radogna