Proton Calorimetry/Meetings/2021/03/03: Difference between revisions

Revision as of 15:22, 3 March 2021

Simon Jolly, Raffaella Radogna, Saad Shaikh, Fern Pannell

Added third thread to FTDI code to handle file writing, resulting in small improvement to performance.
Added ability to set test mode and integration time to FTDI code.
- Integration time set in units of 5us above minimum of 170us to maximum of 1455us (i.e. 170us + 255*5us).
CTRL-C commands are caught by FTDI code to exit cleanly from DAQ, closing connection with FPGA properly.
Tested daisy-chain with resistors in place of photodiodes.
- See the same mirroring whether resistors are in series or in parallel to photodiode.
- Will reach out to Clive and Izzat to continue discussion.

@@ Line 3: / Line 3: @@
 === Present ===
-'''Simon Jolly''', '''Saad Shaikh''', '''Fern Pannell'''
+'''Simon Jolly''', '''Raffaella Radogna''', '''Saad Shaikh''', '''Fern Pannell'''
 === [[ELogs/SaadShaikh|Saad Shaikh]] ===
-*
+*Added third thread to FTDI code to handle file writing, resulting in small improvement to performance.
+*Added ability to set test mode and integration time to FTDI code.
+**Integration time set in units of 5us above minimum of 170us to maximum of 1455us (i.e. 170us + 255*5us).
+*CTRL-C commands are caught by FTDI code to exit cleanly from DAQ, closing connection with FPGA properly.
+*Tested daisy-chain with resistors in place of photodiodes.
+**See the same mirroring whether resistors are in series or in parallel to photodiode.
+**Will reach out to Clive and Izzat to continue discussion.
 === [[ELogs/FernPannell|Fern Pannell]] ===