Proton Calorimetry/Meetings/2021/07/02: Difference between revisions

From PBTWiki
Jump to navigation Jump to search
Line 6: Line 6:


=== [[ELogs/SaadShaikh|Saad Shaikh]] ===
=== [[ELogs/SaadShaikh|Saad Shaikh]] ===
*
*Painted 4 scintillator sheet pairs:
**Sheets 48 & 23 with primer – one layer to glue pair.
**Sheets 54 & 1 with appliance – one layer to glue pair.
**Sheets 52 & 11 with appliance and then primer to glue pair – 10-15 mins for appliance layer to dry.
**Sheets 53 & 2 with appliance and then primer to glue pair – 30-40 mins for appliance layer to dry.
*Neither combination gives acceptable results: lots of gaps in paint layer due to either inconsistencies in sheet thickness, placement misalignment or paint reaction.
**Placement of sheets when glueing is difficult: not much room to adjust once placed as this ruins paint layer.


=== [[ELogs/FernPannell|Fern Pannell]] ===
=== [[ELogs/FernPannell|Fern Pannell]] ===
*
*

Revision as of 10:16, 5 July 2021

Minutes for UCL Proton Calorimetry Meetings, 23rd June

Present

Simon Jolly, Saad Shaikh, Fern Pannell

Saad Shaikh

  • Painted 4 scintillator sheet pairs:
    • Sheets 48 & 23 with primer – one layer to glue pair.
    • Sheets 54 & 1 with appliance – one layer to glue pair.
    • Sheets 52 & 11 with appliance and then primer to glue pair – 10-15 mins for appliance layer to dry.
    • Sheets 53 & 2 with appliance and then primer to glue pair – 30-40 mins for appliance layer to dry.
  • Neither combination gives acceptable results: lots of gaps in paint layer due to either inconsistencies in sheet thickness, placement misalignment or paint reaction.
    • Placement of sheets when glueing is difficult: not much room to adjust once placed as this ruins paint layer.

Fern Pannell