Proton Calorimetry/Meetings/2021/07/30

From PBTWiki

(Difference between revisions)
Jump to: navigation, search
(Created page with "== Minutes for UCL Proton Calorimetry Meetings, 30th July == === Present === '''Simon Jolly''', '''Saad Shaikh''', '''Fern Pannell''' === Saad Shaikh === ...")
(Saad Shaikh)
Line 6: Line 6:
=== [[ELogs/SaadShaikh|Saad Shaikh]] ===
=== [[ELogs/SaadShaikh|Saad Shaikh]] ===
-
*
+
*32 sheets painted with white primer and remeasured.
 +
**Average sheet thickness: 2.83 mm.
 +
**Painting notes:
 +
***Sheets 52, 54, 11 and 1 edges were not masked when painted. Edges cleaned with isopropyl and then masked, likely not as clean if it were masked properly.
 +
***Sheets 9 and 39 a little messy.
 +
*Met with Connor to describe problem with stack modules/glueing sheets.
 +
**Will also sketch ideas for stack holders.
 +
*Clive/Izzat gave preliminary feedback on Rev C DD232 boards.
 +
**Need more info from Marko, will send after 2nd Aug.
 +
**Have also emailed Texas Instruments asking for feedback on design.
 +
*Met with Raffy to catch-up and talk about submission for [https://nssmic.ieee.org/2021/ IEEE NSS MIC].
 +
**Need to produce poster and 5-min video presentation.
 +
*Will investigate abstract submission for [https://frpt-conference.org Flash Radiotherapy and Particle Therapy conference].
 +
**Simon recommends attending in-person either way.
=== [[ELogs/FernPannell|Fern Pannell]] ===
=== [[ELogs/FernPannell|Fern Pannell]] ===
*
*

Revision as of 10:04, 2 August 2021

Contents

Minutes for UCL Proton Calorimetry Meetings, 30th July

Present

Simon Jolly, Saad Shaikh, Fern Pannell

Saad Shaikh

  • 32 sheets painted with white primer and remeasured.
    • Average sheet thickness: 2.83 mm.
    • Painting notes:
      • Sheets 52, 54, 11 and 1 edges were not masked when painted. Edges cleaned with isopropyl and then masked, likely not as clean if it were masked properly.
      • Sheets 9 and 39 a little messy.
  • Met with Connor to describe problem with stack modules/glueing sheets.
    • Will also sketch ideas for stack holders.
  • Clive/Izzat gave preliminary feedback on Rev C DD232 boards.
    • Need more info from Marko, will send after 2nd Aug.
    • Have also emailed Texas Instruments asking for feedback on design.
  • Met with Raffy to catch-up and talk about submission for IEEE NSS MIC.
    • Need to produce poster and 5-min video presentation.
  • Will investigate abstract submission for Flash Radiotherapy and Particle Therapy conference.
    • Simon recommends attending in-person either way.

Fern Pannell

Personal tools