4.2 Rubberband

The rubberband interaction provides an alternative way of zooming in Atlantis. Unlike the ZMR interaction (4.1 Zoom/Move/Rotate (ZMR)) you may exactly specify the region you are interested in by simply drawing a rubberband around that region. The interaction is activated for the current canvas pad by clicking on the Rubberband tab of the interaction control (3.1.3 Interaction Control) in the Control Window.

If rubberbanding is activated, the panel below the rubberband tab shows a box from which you may select a rubberband type:

Draw a rubberband in the current canvas pad by clicking and then dragging with the left mouse button on the picture. When you release the mouse button a pop-up menu will appear near your mouse.

Now you may re-adjust the rubberband by moving any of its corners or (if applicable) middle points.

There are two options to apply the current rubberband:

Rubberband Pop-up Menu

Table 4.2. Options of rubberband pop-up menu

OptionAction
ZoomZooms the selected region.
New ListShows the Lists pop-up window (3.3.4 Lists Window).
SummarizeInformation about the selected objects is displayed in the output display (3.1.5 Output Display) of the Control Window.


Unzoom

After a rubberband has been applied, you may right-click in the canvas pad to get a pop-up Unzoom button. Click to undo the zoom. This works recursively.

Unzoom Full

After any number of rubberbands have been applied, you may right-click in the canvas pad to get a pop-up Unzoom Full button. Click to restore the window to its initial zoomed state.

Rubberbanding in YX

In the YX (5.1 Y/X Projection) projection the rectangular rubberband has additional functionality, which is described in Rubberband in YX Projection (4.2.1 Rubberband in YX Projection).

Rubberbanding in φ/η

In the φ/η (5.2 φ/η Projection) projection only the rectangular rubberband is available. However in this projection the rubberbanding has additional functionality, which is described in Rubberband in φ/η Projection (4.2.2 Rubberband in φ/η Projection).

4.2.1 Rubberband in YX Projection

In the YX projection (5.1 Y/X Projection) the normal rubberband options exist (4.2 Rubberband) except for the rectangle rubberband. In this projection the rectangle rubberband has additional functionality which is available as extra options in the pop-up menu which appears when a rubberbanding operation is complete. These extra options are described in the following table:

Table 4.3. Additional rubberbanding options

OptionAction
Zoom Summed EndcapsZooms the currently selected region, showing the summed data over each of layers of the endcaps LAr-, LAr+, HEC-, and HEC+ being shown in canvas pads 1-4, respectively.
Zoom Endcap Layers -Zooms the currently selected region, showing the 8 individual layers of the LAr and HEC Endcap in the - z region, shown in canvas pads 1-8 with the zoomed in region of the ρZ view in canvas pad 9.
Zoom Endcap Layers +As Zoom Endcap Layers -, but for the +z region of the Endcap.
Zoom Endcap Layers bothAs Zoom Endcap Layers -, but shows hits for both the +z region and -z region of the Endcap.


Unzoom Features

After a rubberband has been applied, you may right-click in the canvas pad to get a pop-up menu which will have the normal rubberband features (4.2 Rubberband). There are also Unzoom Summed and Unzoom Layers.

Unzoom Summed

After Zoom Summed Endcaps has been applied, you may right-click in the canvas pad to get a pop-up Unzoom Summed button. Click to undo the Zoom Summed Endcaps. This works recursively.

Unzoom Layers

As Unzoom Summed but for when any of Zoom Endcap Layers -, Zoom Endcap Layers +, or Zoom Endcap Layers both have been applied.

4.2.2 Rubberband in φ/η Projection

In the φ/η projection (5.2 φ/η Projection) only the rectangular rubberband (4.2 Rubberband) is available. However in this projection the rubberbanding has additional functionality which is available as extra options in the pop-up menu which appears when a rubberbanding operation is complete. These extra options are described in the following table:

Table 4.4. Additional rubberbanding options

OptionAction
Zoom LArZooms the currently selected region, with the four samplings of the LAr calorimeter being shown in canvas pads 1-4, respectively.
Zoom CalorimetersAs Zoom LAr, with additionally the four samplings of the hadronic calorimeters being shown in canvas pads 5-8, respectively.
CutSwitch on the φ and η cuts, with the cut region set to that defined by the rubberband. If this Cut is dragged into another canvas pad the projection in that canvas pad is not changed.
Whole WindowSets the current zoom region to correspond to the whole canvas window.
Print ContentsA short summary describing the tracks and the calorimetric energy inside the rubberband region is displayed in the output display (3.1.5 Output Display) of the Control Window.


Unzoom Features

After a rubberband has been applied, you may right-click in the canvas pad to get a pop-up menu which will have the normal rubberband features (4.2 Rubberband). There are also Unzoom LAr and Unzoom Calorimeters.

Unzoom LAr

After Zoom LAr has been applied, you may right-click in the canvas pad to get a pop-up Unzoom LAr button. Click to undo the Zoom LAr. This works recursively.

Unzoom Calorimeters

As Unzoom LAr but for when Zoom Calorimeters has been applied.