ELogs/UnikLimbu: Difference between revisions
< ELogs
(→To Do) |
|||
| Line 4: | Line 4: | ||
Add list of to-do list items | Add list of to-do list items | ||
# Getting rid of the photodiode number buttons and | # Getting rid of the photodiode number buttons and implement a text-entry box for the number of photodiodes instead. | ||
# Implementing two text-entry boxes for the minimum (0mm) and maximum range which updates automatically when the number of photodiodes is entered. | # Implementing two text-entry boxes for the minimum (0mm) and maximum range which updates automatically when the number of photodiodes is entered. | ||
#* The x-axis must show millimetres, not photodiode numbers because the important quantity is the Water Equivalent Thickness that the protons have penetrated. | #* The x-axis must show millimetres, not photodiode numbers because the important quantity is the Water Equivalent Thickness that the protons have penetrated. | ||
Revision as of 16:04, 9 August 2022
Electronic Log for Unik Limbu
To Do
Add list of to-do list items
- Getting rid of the photodiode number buttons and implement a text-entry box for the number of photodiodes instead.
- Implementing two text-entry boxes for the minimum (0mm) and maximum range which updates automatically when the number of photodiodes is entered.
- The x-axis must show millimetres, not photodiode numbers because the important quantity is the Water Equivalent Thickness that the protons have penetrated.
- Getting rid of the buttons that reload the plot and instead implement four check boxes on the plot.
- Raw photodiode values
- Error bars
- Quenched Bragg curve
- Bortfeld curve
- Convert the Start and Stop buttons into a single button that changes role depending on whether the display is running or stopped.
- If it's stopped: it should say "Run" and start the display running
- If it's running: it should say "Stop" and should stop or pause the display
Completed
- Understood and made use of Papa Parse to load the data
- Plotted the bar graph for the photodiode data (but currently working in adding the axes)