Clatterbridge

From PBTWiki
Jump to navigation Jump to search

Simulation of the Clatterbridge beamline

This simulation models the monoenergetic 62.5 MeV proton beam at Clatterbridge Cancer Centre, as it traverses the components of the beamline and is then deposited into a volume of water. The beamline components are contained within a geometry modelling the Clatterbridge treatment room.

The protons are generated using the G4ParticleGun class, and the physics list used is QGSP_BIC_HP, standard for simulating clinical proton beams.

The energy of the beam after travelling through the beamline components is measured by tracking the energy deposition of individual protons within the water volume, using an implementation of the G4VSensitiveDetector.cc class. This simulation produces a post-beamline energy of 60.08 MeV and a Bragg peak at a depth of 31 mm in water.

[insert image of visualisation]

Running the simulation

Run macro proton.mac

This will run the simulation and produce the required output files.

[username@plus1 ProtonPB_build]$ ./protonPB proton.mac

Output files

The simulation code and proton.mac produce several output files:

protonKE.out

This text file contains output information from SteppingAction.cc , printed on a step-by-step basis for each proton (event). The first two columns contain the x and y coordinates (in mm) of the proton. The third column contains the z position of the proton (in mm), relative to the position of the source at the inner room boundary. The last column contains the energy (MeV) of the proton at this z position.

 6.66882  -11.4767  1770  59.8738
-7.60842  -11.4391  1770  60.186
-9.37841  -14.363   1770  43.1861
-13.2143   1.55943  1770  60.4776
 1.81337   11.558   1770  60.2989

secondariesKE.out

This text file contains information recorded in SteppingAction.cc about neutrons and gammas produced in the simulation. As shown below, the first column of the file contains the particle name and the second column contains its energy (in MeV):

gamma	0.566288
gamma	8.19896
neutron	5.12058
gamma	0.122181
gamma	0.432295
gamma	7.67023
neutron	2.71641

FluxLongitudinal.txt

This file is automatically written by proton.mac and contains the proton flux data from the longitudinal scorer. The columns represent the bin number in the x, y and z directions, and the number of protons per cm2:

# mesh name: waterMeshlongitudinal
# primitive scorer name: protonFlux
# iX, iY, iZ, value [percm2]
0,0,0,25.97935669321147
0,0,1,25.90015344712939
0,0,2,25.84461190407653

In simulation_analysis.C the data in FluxLongitudinal.txt is read in and written to another text file, FluxLongitudinal_Mod.txt to modify the standard formatting into a suitable format for further analysis:

0 0 0 25.97935669321147
0 0 1 25.90015344712939
0 0 2 25.84461190407653

EnergyLongitudinalMesh.txt

This text file is produced by proton.mac in the same way as FluxLongitudinal.txt above, and contains information about the proton energy deposited within the water volume, divided into bins parallel to the beam:

# mesh name: waterMeshlongitudinal
# primitive scorer name: energyDeposit
# iX, iY, iZ, value [MeV]
0,0,0,14778.66421571247
0,0,1,14787.50686991539
0,0,2,14943.0041959171

DoseLateralMesh.txt

This text file is produced by proton.mac in the same way as the other scorers above, and contains information about the proton dose in bins perpendicular to the beam:

# mesh name: waterMeshlateral
# primitive scorer name: doseDeposit
# iX, iY, iZ, value [Gy]
...
95,0,0,3.307349132489631e-09
96,0,0,3.296548479981562e-09
97,0,0,1.01396339893476e-09

Data Analysis

Open ROOT and run analysis file

The simulation analysis file reads the data in the output files and produces the associated plots.

[username@plus1 ProtonPB_build]$ root -l

root [0] .x simulation_analysis.C

Proton energy deposition in water

This is a histogram showing the frequency of incident protons to the water box at different energy values. It is produced from data in stopper.txt which contains the hits from the water box sensitive detector.

Proton stopping distance in water

Proton flux along beamline

This plot is produced from FluxLongitudinal_Mod.txt and shows the number of protons per cm2 passing through distinct points along the beamline (in the z direction). The decrease in proton flux is clearly shown at particular points along the beamline, for example at the location of the brass stopper (30cm).

Kinetic energy of beam

This plot is produced from kin.out and shows the kinetic energy distribution of the proton beam at a specified point along the beamline. This location is specified in SteppingAction.cc in which a particular position in z can be input (see Section 5.6 Kinetic Energy Readings).

[INSERT KINETIC ENERGY DISTRIBUTION HISTOGRAM]


The xy coordinates of each proton are also recorded, and are used to produce the following plot which shows the spatial coordinates and the kinetic energy of each proton at the specified position in z, along the beamline.

[INSERT 3D SPATIAL/KINETIC PROTON PLOT]

Changing parameters

Initial beam parameters

Initial parameters of the proton beam can be modified in proton.mac

Beam radius

/gps/pos/radius 3 mm

Beam energy

This simulation models the proton beam source with a Gaussian distribution.

/gps/ene/type Gauss
/gps/ene/mono 62.5 MeV
/gps/ene/sigma 0.082 MeV

Source position

The proton source is positioned at z = -420 cm relative to the centre of the inner room (the mother volume), which translates as the wall surface of the inner room.

/gps/pos/type Plane
/gps/pos/shape Circle
/gps/pos/centre 0.0 0.0 -420 cm

Scoring mesh

Longitudinal scoring mesh

A longitudinal scoring mesh extends along the length of the beamline from the source to the water volume. The mesh utilises a filter to detect the flux of protons per cm2 and writes the data to the text file FluxLongitudinal.txt . The location of the mesh centre can be changed in proton.mac , in addition to the dimensions of the mesh and the number of bins.

/score/create/boxMesh waterMeshlongitudinal
/score/mesh/boxSize 10. 10. 10. cm
/score/mesh/nBin 1 1 400
/score/mesh/translate/xyz 0. 0. -226 cm

The filter can also be changed to observe the flux of particles other than protons:

/score/quantity/cellFlux protonFlux
/score/filter/particle protonFilter proton

Lateral scoring mesh

A lateral scoring mesh is positioned at the end of the nozzle to record the dose distribution of the protons. The position, size and bin number of this mesh can be modified in the same way as the longitudinal mesh example above.

Beamline components

Components of the beamline can be added/removed in DetectorConstruction.cc . If the dimensions of the water box are modified, the following lines in simulation_analysis.C will also need to be modified:

Float_t lengthBox = 200, widthBox = 200;

The depthFix variable to calculate the stopping distance of the protons within the analysis will also need to be adjusted if the water box dimensions or location are modified. depthFix is calculated by taking the z position of the centre of the water box (relative to the centre of the inner room), and subtracting the half length of the water box (calculated in mm):

//depth fix - water box centred at -2260 mm, half length = 100 mm. 
Double_t depthFix = 2360;

Sensitive detectors

In this simulation, the water volume is assigned as a sensitive detector in DetectorConstruction.cc :

G4SDManager* SDman = G4SDManager::GetSDMpointer();
G4String name="SD";
DetectorSD = new SensitiveDetector(name);
SDman->AddNewDetector(DetectorSD);
logicWater->SetSensitiveDetector(DetectorSD);

Another beamline component may be used by modifying the following line and setting its logical volume as a sensitive detector:

logicWater->SetSensitiveDetector(DetectorSD);

The component should be chosen such that a significant proportion of the proton beam deposits energy, such as in the brass stopper, in order to produce enough data for plots.

SensitiveDetector.cc is derived from the G4VSensitiveDetector.cc base class. On a step-by-step basis, the energy deposited by the proton is recorded as a "hit" and added to a HitsCollection object. Other parameters may be retrieved at each step in the method ProcessHits .

G4bool SensitiveDetector::ProcessHits(G4Step* aStep, G4TouchableHistory* ROhist)
{
  G4double edep = aStep->GetTotalEnergyDeposit();
  if(aStep->GetTrack()->GetDefinition()->GetParticleName() == "proton"){
    ::Hit* newHit = new ::Hit();
    newHit->SetEdep(edep);
    HitID = detectorCollection->insert(newHit);
    return true;
  }

Physics list

This simulation uses one of the standard physics lists: QGSP_BIC_HP. A user-defined physics list can be specified in the class PhysicsList.cc .

Kinetic energy readings

[could go under data analysis section]

The kinetic energy of the beam after passing through a particular component of the beamline is found in the class SteppingAction.cc . This class contains a map named componentMap with the names of the components as keys and the z coordinate of each component (taken as the furthest edge from the source):

componentMap.insert( std::pair<std::string,double>("ScatteringFoil1",80.025));
componentMap.insert( std::pair<std::string,double>("BrassStopper",306.6));
componentMap.insert( std::pair<std::string,double>("ScatteringFoil2",306.625));
componentMap.insert( std::pair<std::string,double>("KaptonWindow",356.05));
componentMap.insert( std::pair<std::string,double>("AntiScatterCollimator1",1140.));
componentMap.insert( std::pair<std::string,double>("MonitorChambers",1150.02));
componentMap.insert( std::pair<std::string,double>("NozzleBefore",1692.));
componentMap.insert( std::pair<std::string,double>("NozzleAfter",1766.));
componentMap.insert( std::pair<std::string,double>("WaterSurface",1840.));

To find the kinetic energy distribution of the beam at a particular point, insert the component name from the map above into this line:

double cPos = (double)componentMap.find("ScatteringFoil2")->second;

The code then compares the z position of a proton with the position of the chosen component on a step-by-step basis, and if the proton is at the chosen position its kinetic energy is recorded in kin.out :

if(fabs(zpos-cPos) < 1.0e-8){
   std::ofstream hitsfile(filename, std::ios::app);
   if(hitsfile.is_open()){
      G4double ke =  step->GetPreStepPoint()->GetKineticEnergy();
      hitsfile << zpos << "\t"
	       << ke <<G4endl;
      hitsfile.close();
   }
}


After any modifications to the simulation files, the code will need to be compiled. In the build directory, write:

[username@plus1 ProtonPB_build]$ make 

After this proton.mac can be run:

[username@plus1 ProtonPB_build]$ ./protonPB proton.mac

Modifying Analysis Methods

The number of bins to store the data for each histogram can be changed, here the number of bins is 800:

TH1D* waterEnergy = new TH1D ("waterDep", "Energy deposition in water box", 800, 0., 65.);

The range of the axes for each plot can also be specified in order to zoom into the energy peak:

waterEnergy->GetXaxis()->SetRangeUser(0, 64);

Files