ELogs/MechanicalEngineering: Difference between revisions

From PBTWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 5: Line 5:
=== Proton Therapy ===
=== Proton Therapy ===


June 2021 - Prepare scintillator sheets to be adhered together using standard primer
November 2021 - Design initial prototype of a new holder that will clamp scintillator sheets together. Will supersede previous adhesive idea
February 2022 - Create CAD model for small Peli Case so ideas on how to install the holder into the case can be prototyped
May 2022- CAD Prototype a sliding system to mount multiple scintillator holders into a case
August 2022 - Created CAD cross hair for Peli Case to be printed. Also created small printed windows to clamp Mylar smooth over the beam entry point.
September 2022 - Machine a patch panel complete with 10 smaller panels that can be swapped between on the main patch panel to allow for various electrical feedthroughs
=== Radiotherapy ===




Line 33: Line 20:


; February : Create CAD model for small Peli Case so ideas on how to install the holder into the case can be prototyped
; February : Create CAD model for small Peli Case so ideas on how to install the holder into the case can be prototyped


; July : Created CAD models for internal components including:  
; July : Created CAD models for internal components including:  
:* Scintillator holder.  
:* Scintillator holder.  
 
:* 2x Side Vice faces.  
- 2x Side Vice faces.  
:* 1x Front Vice face.  
 
:* Cover for beam entry point.
- 1x Front Vice face.  
: These were printed soon after.
 
: Beam entry point was cut out of the case, piece was sent for testing with Adam Gibson.
- Cover for beam entry point.
: Machined two special 1/4-20 UNC screws for camera mount.
 
: Tapped all holes on Scintillator holder to take m5 nylon screws to allow vice faces to travel.
These were printed soon after.
 
Beam entry point was cut out of the case, piece was sent for testing with Adam Gibson.
 
Machined two special 1/4-20 UNC screws for camera mount.
 
Tapped all holes on Scintillator holder to take m5 nylon screws to allow vice faces to travel.


=== 2021 ===
=== 2021 ===

Revision as of 15:36, 20 September 2022

Electronic Log for Mechanical Engineering

To Do

Proton Therapy

Completed

2022

September
Machine a patch panel complete with 10 smaller panels that can be swapped between on the main patch panel to allow for various electrical feedthroughs
August
Created CAD cross hair for Peli Case to be printed. Also created small printed windows to clamp Mylar smooth over the beam entry point.
June
Initiated design of large Peli Case. Received Lab scissor jack used to mount camera.
May
CAD Prototype a sliding system to mount multiple scintillator holders into a case
February
Create CAD model for small Peli Case so ideas on how to install the holder into the case can be prototyped
July
Created CAD models for internal components including:
  • Scintillator holder.
  • 2x Side Vice faces.
  • 1x Front Vice face.
  • Cover for beam entry point.
These were printed soon after.
Beam entry point was cut out of the case, piece was sent for testing with Adam Gibson.
Machined two special 1/4-20 UNC screws for camera mount.
Tapped all holes on Scintillator holder to take m5 nylon screws to allow vice faces to travel.

2021

November
Design initial prototype of a new holder that will clamp scintillator sheets together. Will supersede previous adhesive idea
June
Prepare scintillator sheets to be adhered together using standard primer