Proton Calorimetry/Experimental Runs/2018/Feb21: Difference between revisions
m (→Equipment List) |
|||
| Line 8: | Line 8: | ||
|- | |- | ||
| style="text-align: center;" | Single Module Scintillator Block | | style="text-align: center;" | Single Module Scintillator Block | ||
| style="text-align: center;" | Optical | | style="text-align: center;" | Optical gel required to couple Scintillator to PMT | ||
|- | |- | ||
| style="text-align: center;" | Photomultiplier Tube | | style="text-align: center;" | Photomultiplier Tube | ||
Revision as of 17:39, 19 February 2018
Beam tests of the single module with PRaVDA CMOS pixel sensors (PRIAPUS) at the Birmingham Cyclotron with a 36 MeV beam.
Equipment List
| Item | Notes |
|---|---|
| Single Module Scintillator Block | Optical gel required to couple Scintillator to PMT |
| Photomultiplier Tube | (Hamamatsu 2"?) |
| Portable Enclosure | Modified Peli 1510 Waterproof Wheeled Equipment Case. 230 x 555 x 350mm |
| LeCroy HDO6104 Oscilloscope | Records PMT output |
| DAQ Laptop | Records HV output / Controls Caen HV supply |
| Caen NDT1470 HV Supply | Supplies HV to PMT |
| Control Laptop x 2 | One each for Remote Desktop control of LeCroy Oscilloscope and DAQ Laptop. |
| Network Hub x 2 | One for the experimental room for the LeCroy HDO6104 and DAQ Laptop to connect to,
one for the control room for each of the Control Laptops to connect to. |
| Ethernet Cable x 4 | To connect each control laptop, the LeCroy HDO6104 and DAQ Laptop to their respective network hubs. |
| Ethernet Cable | To connect the two Network Hubs and complete the network for controlling DAQ equipment from the control room. |
| SMA (female) to BNC (male) Cable | Signal from enclosure port to LeCroy Oscilloscope |
| SHV Cable | HV supply from experimental room to enclosure port |
| USB Cable | Caen HV unit to DAQ Laptop |