Proton Calorimetry/Experimental Runs/2022/Sep1: Difference between revisions
SaadShaikh (talk | contribs) No edit summary |
SimonJolly (talk | contribs) No edit summary |
||
| Line 8: | Line 8: | ||
== Experiment Plan == | == Experiment Plan == | ||
Estimated first beam: 16.00. | |||
# Set up mains cabling and networking in treatment and control rooms. | |||
# | |||
*WET measurement of stack of clear sheets with mylar foil. | *WET measurement of stack of clear sheets with mylar foil. | ||
*Addition of stack of white painted sheets for WET measurement of both stacks. | *Addition of stack of white painted sheets for WET measurement of both stacks. | ||
Revision as of 18:55, 31 August 2022
Detector Equipment
- C-section stack holder containing 25 clear scintillator sheets around 2.86 mm thick with 24 sheets of mylar foil. Add 25th sheet of Mylar?
- C-section stack holder containing 23 white painted scintillator sheets around 2.86 mm thick.
- Zarges case.
- Clatterbridge stack A and B (to be assembled during beam test)
- DDC232 rev. B x2 & Nexys Video.
- Single Scintillator Block & camera.
Experiment Plan
Estimated first beam: 16.00.
- Set up mains cabling and networking in treatment and control rooms.
- WET measurement of stack of clear sheets with mylar foil.
- Addition of stack of white painted sheets for WET measurement of both stacks.
- Removal of stack of clear sheets for WET measurement of stack of white painted sheets.
- WET measurement of Zarges case with mylar windows without any stacks of scintillator.
- Quenching measurements?
- Assemble Clatterbridge stacks during these measurements
- Calibration shoot-through measurements for Clatterbridge stacks.
- Possible WET measurement of Clatterbridge A stack?