From mp@hep.ucl.ac.uk Mon Jan 19 19:57:37 1998 Date: Mon, 19 Jan 1998 15:07:14 GMT From: "MARTIN POSTRANECKY,UCL-PHYSICS DEP,HEPP GROUP,GOWER ST,LONDON WC1E 6BT,TEL:(00-44)-[0]171-419 3453,FAX:[0]171-380 7145" To: meh@ax8.hep.ucl.ac.uk, mp@ax8.hep.ucl.ac.uk ------------------------------------------------------------------------------ Author Ian A.Vine Email/DECNET UCLVA::IAV Email/internet iav@hep.ucl.ac.uk File UCLVA::DISK$U1:[USERACT.IAV.LTC.DOCS]RUNNING_ROCTEST_LTC.TXT Last Update 05-Oct-1995 (IAV) 05-Oct-1995 (MP) ----------------------------------------------------------------------------- Notes : All text in ` ' represents DCL commands that can be typed ======= or added to a command file (don't include the quotes) ------------------------------------------------------------------------------ ZLTC Test Software. =================== Running ======= In all the following cases it is assumed the main setup file has been executed, i.e. the setup.com file in the CTD_ONLINE_BASE directory. Main setup file location ======================== UCL `@DISK$Z1:[ZEUS_ONLINE.CTD_ONLINE3]SETUP' DESY `@SYS$SYSDEVICE:[CTD_ONLINE]SETUP' ( if using the UCL account, setup is done at login ) Oxford `@SYS$SYSDEVICE:[CTD_ONLINE]SETUP' Where to run. ============= UCL UCLVE DESY ZUKVS3 Oxford ZUKVS? Selecting link to root transputer. ================================== Before starting the software the link to the root transputer of the network must be defined ( link 0 is the default ) DESY. ----- LINK0 Z system DAQ ( = HKB200 ) LINK1 rucksack flying link ( = HKB201 ) LINK2 FADC system DAQ ( = HKB202 ) LINK3 level 6 electronics. ( = HKB203 ) UCL. ---- LINK0 ( = upper crate ) LINK1 ( = lower crate ) /cont. - 2 - TCT === 1) Setup the required version : To setup the current production version in DESY ( ZUKVS3, UCL account ) ---------------------------- Type `TCTSET' UCL --- Either type `@TCT_BASE_DIR:TCTSET' ( or add the line `TCTSET :== @TCT_BASE_DIR:TCTSET' to your login.com, then you can just type `TCTSET' when you login next time ) Version Comment Command ------- ------- ------- v4_2 uses harness v5_2, godel v1_9 `CTD_SET TCT V4_2' v5_0 uses harness v6_0, godel v1_11 `CTD_SET TCT V5_0' v5_1 uses harness v7_2, godel v1_11 `CTD_SET TCT V5_1' v5_2 normal and flying link version `CTD_SET TCT V5_2' 2) Select the required link from VAX to root transputer : At the moment TCT can only run on a ROC connected to the VAX link, not across a transputer network. DESY ---- LINK1 ( = HKB201 ) rucksack flying link LINK3 ( = HKB203 ) level 6 electronics. UCL --- LINK0 ( = upper crate ) LINK1 ( = lower crate ) Typing TCT starts the normal version. Typing TCTF starts the flying link version. /cont. - 3 - ROCTEST ======= 1) Setup the required version : To setup the current production version in DESY ( ZUKVS3, UCL account ) ---------------------------- Type `ROCSET' UCL --- Either type `@ROCTEST_BASE_DIR:ROCSET' ( or add the line `ROCSET :== @ROCTEST_BASE_DIR:ROCSET' to your login.com, then you can just type `ROCSET' when you login next time ) Version Comment Command ------- ------- ------- ucl_v4_2 uses harness v5_2, godel v1_9 `CTD_SET ROCTEST UCL_V4_2' mask zcard hit flags (ucl_v4_2 is not available at DESY) ucl_v5_0 uses harness v7_4, godel v1_11 `CTD_SET ROCTEST UCL_V5_0' new zcard test 2) The command to run the selected version of roctest is : ROCTEST linknumber bootable where linknumber is the number of the link to use ---------- ( eg. 0 for link 0 ) and bootable is the name of the bootable to use -------- ( eg. 16CRATE to run on 16 crates, Z0 to run on a single crate ) Examples : ---------- `ROCTEST 0 16CRATE' will use link 0 and run on all 16 crates `ROCTEST 3 Z0' will use link 3 and run a single crate version ( eg level 6 in DESY )