EAGLE Version 4.11 Copyright (c) 1988-2003 CadSoft

Electrical Rule Check for /home/mp/EAGLE/projects/test_board/Harness-Test-Board-1-1_schem.sch at  1/08/2004 18:52:22 

ERROR: Sheet 1/1: unconnected INPUT Pin: U1 RIN2+
ERROR: Sheet 1/1: unconnected INPUT Pin: U1 RIN2-
ERROR: Sheet 1/1: unconnected INPUT Pin: U1 RIN1+
ERROR: Sheet 1/1: unconnected INPUT Pin: U1 RIN1-
WARNING: Sheet 1/1: POWER Pin U1 GND connected to DGND
ERROR: Sheet 1/1: unconnected INPUT Pin: U2 RIN4+
ERROR: Sheet 1/1: unconnected INPUT Pin: U2 RIN4-
ERROR: Sheet 1/1: unconnected INPUT Pin: U2 RIN3+
ERROR: Sheet 1/1: unconnected INPUT Pin: U2 RIN3-
WARNING: Sheet 1/1: POWER Pin U2 GND connected to DGND
ERROR: Sheet 1/1: unconnected INPUT Pin: U3 DIN3
ERROR: Sheet 1/1: unconnected INPUT Pin: U3 DIN4
WARNING: Sheet 1/1: POWER Pin U3 GND connected to DGND
ERROR: 2 OUTPUT Pins on net CLKOUT
ERROR: 2 OUTPUT Pins on net COMOUT
WARNING: Only 1 Pin on net TEMP_RET
WARNING: Sheet 1/1, Net DGND: wire overlaps pin at (-68.58 11.43)
WARNING: Sheet 1/1, Net VDD: wire overlaps pin at (-71.12 -26.67)
WARNING: Sheet 1/1, Net DGND: wire overlaps pin at (15.24 -19.05)
WARNING: Sheet 1/1, Net CLKB(0): wire overlaps pin at (-50.8 17.78)
WARNING: Sheet 1/1, Net COM(0): wire overlaps pin at (-53.34 10.16)
WARNING: Sheet 1/1, Net SELECT: wire overlaps pin at (-53.34 5.08)
WARNING: Sheet 1/1, Net COMB(1): wire overlaps pin at (-53.34 -17.78)
WARNING: Sheet 1/1, Net CLK(1): wire overlaps pin at (-53.34 -25.4)

Board and schematic are consistent

   12 errors
   12 warnings