EAGLE Version 4.11 Copyright (c) 1988-2003 CadSoft

Electrical Rule Check for /home/mp/EAGLE/projects/test_board/Harness-Test-Board-1-1_schem.sch at  1/08/2004 18:54:41 

ERROR: Sheet 1/1: unconnected INPUT Pin: U1 RIN2+
ERROR: Sheet 1/1: unconnected INPUT Pin: U1 RIN2-
ERROR: Sheet 1/1: unconnected INPUT Pin: U1 RIN1+
ERROR: Sheet 1/1: unconnected INPUT Pin: U1 RIN1-
WARNING: Sheet 1/1: POWER Pin U1 GND connected to DGND
ERROR: Sheet 1/1: unconnected INPUT Pin: U2 RIN4+
ERROR: Sheet 1/1: unconnected INPUT Pin: U2 RIN4-
ERROR: Sheet 1/1: unconnected INPUT Pin: U2 RIN3+
ERROR: Sheet 1/1: unconnected INPUT Pin: U2 RIN3-
WARNING: Sheet 1/1: POWER Pin U2 GND connected to DGND
ERROR: Sheet 1/1: unconnected INPUT Pin: U3 DIN3
ERROR: Sheet 1/1: unconnected INPUT Pin: U3 DIN4
WARNING: Sheet 1/1: POWER Pin U3 GND connected to DGND
ERROR: 2 OUTPUT Pins on net CLKOUT
ERROR: 2 OUTPUT Pins on net COMOUT
WARNING: Only 1 Pin on net TEMP_RET
WARNING: Sheet 1/1, Net DGND: wire overlaps pin at (-2.7 0.45)
WARNING: Sheet 1/1, Net VDD: wire overlaps pin at (-2.8 -1.05)
WARNING: Sheet 1/1, Net DGND: wire overlaps pin at (0.6 -0.75)
WARNING: Sheet 1/1, Net CLKB(0): wire overlaps pin at (-2 0.7)
WARNING: Sheet 1/1, Net COM(0): wire overlaps pin at (-2.1 0.4)
WARNING: Sheet 1/1, Net SELECT: wire overlaps pin at (-2.1 0.2)
WARNING: Sheet 1/1, Net COMB(1): wire overlaps pin at (-2.1 -0.7)
WARNING: Sheet 1/1, Net CLK(1): wire overlaps pin at (-2.1 -1)

No board loaded - consistency has not been checked

   12 errors
   12 warnings