Proton Calorimetry/Meetings/2020/07/15

From PBTWiki

(Difference between revisions)
Jump to: navigation, search
(Saad Shaikh)
(Saad Shaikh)
Line 8: Line 8:
*Interfaced DDC232 code with a UART transmitter, discussed UART interface in [http://www.hep.ucl.ac.uk/pbt/wikiData/presentations/2020/SS150720_UART_SIM.pptx this presentation].
*Interfaced DDC232 code with a UART transmitter, discussed UART interface in [http://www.hep.ucl.ac.uk/pbt/wikiData/presentations/2020/SS150720_UART_SIM.pptx this presentation].
*DDC232 code & UART interface work as intended in simulation.
*DDC232 code & UART interface work as intended in simulation.
-
*Design works in hardware: able to see output from DDC232/FPGA on PC.
+
*Design works in hardware! Able to see output from DDC232/FPGA on PC.
**Will now need to verify that output is correct.
**Will now need to verify that output is correct.
-
**Next step is to automate saving data to a .txt file.
+
**Next step is then automate saving data to a .txt file.
=== [[ELogs/RaffaellaRadogna|Raffaella Radogna]] ===
=== [[ELogs/RaffaellaRadogna|Raffaella Radogna]] ===

Revision as of 21:41, 15 July 2020

Contents

Minutes for UCL Proton Calorimetry Meetings, 15th July

Present

Simon Jolly, Saad Shaikh, Raffaella Radogna, Fern Pannell

Saad Shaikh

  • Interfaced DDC232 code with a UART transmitter, discussed UART interface in this presentation.
  • DDC232 code & UART interface work as intended in simulation.
  • Design works in hardware! Able to see output from DDC232/FPGA on PC.
    • Will now need to verify that output is correct.
    • Next step is then automate saving data to a .txt file.

Raffaella Radogna

Personal tools