Proton Calorimetry/Meetings/2025/05/06: Difference between revisions
(Created page with "== Minutes for UCL Proton Beam Therapy Group Meetings, 6th May == === Present === '''Joe Bateman''', '''Sonia Escribano''', '''Raffaella Radogna (via Teams)''', '''Tony Price (via teams)''', '''Simon Jolly''' === Simon Jolly === * For frontiers paper from Tony we need: ** Individual frame with single clear spot ** Individual frame with two blurred spots i.e. catching spot moving ** Frame that just shows corrupted data ** Summed data for one la...") |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 14: | Line 14: | ||
** Single frame from gantry 1 on first night compared to egg shaped from gantry 3 | ** Single frame from gantry 1 on first night compared to egg shaped from gantry 3 | ||
=== [[ELogs/ | === [[ELogs/RaffaellaRadogna|Raffaella Radogna]] === | ||
* Approved for 7 hours beam time in Trento - likely also includes setup etc | * Approved for 7 hours beam time in Trento - likely also includes setup etc | ||
Latest revision as of 12:28, 5 August 2025
Minutes for UCL Proton Beam Therapy Group Meetings, 6th May
Present
Joe Bateman, Sonia Escribano, Raffaella Radogna (via Teams), Tony Price (via teams), Simon Jolly
Simon Jolly
- For frontiers paper from Tony we need:
- Individual frame with single clear spot
- Individual frame with two blurred spots i.e. catching spot moving
- Frame that just shows corrupted data
- Summed data for one layer - all as pictures just for 5by5
- Single frame from gantry 1 on first night compared to egg shaped from gantry 3
Raffaella Radogna
- Approved for 7 hours beam time in Trento - likely also includes setup etc
- Going to Rome to investigate gluing together square fibres
Sonia Escribano
- Overall light output from individually calibrated modules differs between modules - is it better to calibrate overall stack or individual modules and then scale?
- Calibrate photodiode by photodiode I.e. divide by individual photodiode values
- Calibration is giving values too high for some of the modules which is making high energy Bragg peaks
- Dismantle module 4 and reassemble without injection moulded sheet
-
Joe Bateman
- Continuing with QuADProBe frontiers paper