Proton Calorimetry/Experimental Runs/2019/Apr12-15: Difference between revisions
Line 1: | Line 1: | ||
== Experiment List == | |||
ISDI Sensor Instructions | |||
General Sensor Configuration | |||
Base Configuration is 14 x 1 Bit | |||
Resolution is 1030 x 1536 pixels | |||
For selecting pixel rows in centre: Use horizontal offset (ignore DVAL to activate field) and horizontal resolution | |||
Increase number of frame buffers | |||
To increase the number of frame buffers to the allowed maximum, start XCAP as administrator. | |||
Select Capture/Sequence Capture/Video to Frame Buffers/Driver Assistant | |||
Tick box in left field, then set number of frame buffers here. | |||
Serial Terminal instructions for ISDI sensor | |||
Find serial terminal in PIXCI(R) tab of sensor control software. | |||
In Controls/Options: Make sure "Send string with CR" is selected. Should be default. | |||
In Controls/Setup: Select Serial Port: Enabled. Baud rate has to be 115200 | |||
Set low full well mode using W000300000 | |||
Set high full well mode using W000300004 | |||
Read full well mode using R0003 | |||
Continuous Field buffer setting | |||
This setting makes sure that the buffer is filled with a new frame as they come in. If this option is not selected the sensor and software will not be synchronised and we will record a lot of pitch black images. | |||
Select Capture/Live Options//Live Mode/Live Video: Continuous All buffer capture | |||
=== 12–15th April === | |||
Range calorimeter measurements with ISDI sensor + scintillator stack. | |||
=== 12–13th April === | |||
=== 12–13th April === | === 12–13th April === | ||
Revision as of 01:14, 13 April 2019
Experiment List
ISDI Sensor Instructions General Sensor Configuration Base Configuration is 14 x 1 Bit Resolution is 1030 x 1536 pixels For selecting pixel rows in centre: Use horizontal offset (ignore DVAL to activate field) and horizontal resolution
Increase number of frame buffers To increase the number of frame buffers to the allowed maximum, start XCAP as administrator. Select Capture/Sequence Capture/Video to Frame Buffers/Driver Assistant Tick box in left field, then set number of frame buffers here.
Serial Terminal instructions for ISDI sensor Find serial terminal in PIXCI(R) tab of sensor control software. In Controls/Options: Make sure "Send string with CR" is selected. Should be default. In Controls/Setup: Select Serial Port: Enabled. Baud rate has to be 115200 Set low full well mode using W000300000 Set high full well mode using W000300004 Read full well mode using R0003
Continuous Field buffer setting This setting makes sure that the buffer is filled with a new frame as they come in. If this option is not selected the sensor and software will not be synchronised and we will record a lot of pitch black images. Select Capture/Live Options//Live Mode/Live Video: Continuous All buffer capture
12–15th April
Range calorimeter measurements with ISDI sensor + scintillator stack.
12–13th April
12–13th April
images from sensor: User/Public/Document/EPIX/XCAP/data/ images from dslr: User/Public/Document/Nikon/
- full sensor area
- shooting on back window
- 0. finding the best beam intensity (proton)
- Simon checking the intensity on pixels from dslr with nikon software
- camera settings
- exposure 1/2 sec
- aperture f/3
- ISO 200
Run number | Full Well Mode | Beam Energy (MeV/u) | Range (estimated) | N particles | Spot size (mm) | ion type | DSLR file name | Comments | |
---|---|---|---|---|---|---|---|---|---|
N | well mode | Energy MeV/u | Range | particles | Spot FWHM | test | dslr file name DSC_ | comments | |
00 | low | None | - | None | None | - | - | background | |
01 | high | None | - | None | None | - | - | background | |
not saved from Laurent | high | None | - | None | None | - | DSC_145 | intensity check | |
02 | high | 221.06 | - | 2*10^9 | 8.1 | p | DSC_147 | shoot through no degrader | |
03 | high | 221.06 | - | 3.2*10^9 | 11.1 | p | DSC_149 | shoot through no degrader. from now on exposure time on dslr 0.2 sec | |
04 | high | 221.06 | - | 3.2*10^9 | 20.0 | p | DSC_150 | shoot through no degrader. | |
05 | low | 221.06 | - | 1.2*10^9 | 20.0 | p | DSC_151 | shoot through no degrader. exposure time back to 0.5 sec | |
06 | low | 221.06 | - | 1.2*10^9 | 11.1 | p | DSC_152 | shoot through no degrader. | |
07 | low | 221.06 | - | 1.2*10^9 | 8.1 | p | DSC_153 | shoot through no degrader. | |
08 | high | 220.51 | - | 8*10^8 | 4.9 | He | DSC_155 | shoot through no degrader. exposure 0.1 sec | |
09 | high | 220.51 | - | 8*10^8 | 8.1 | He | DSC_156 | shoot through no degrader. | |
10 | high | 220.51 | - | 8*10^8 | 10.1 | He | DSC_157 | shoot through no degrader. | |
11 | high | 430.1 | - | 8*10^7 | 3.4 | C | DSC_159 | shoot through no degrader. ripple filter 3mm | |
12 | high | 430.1 | - | 8*10^7 | 7.8 | C | DSC_160 | shoot through no degrader. ripple filter 3mm | |
13 | high | 430.1 | - | 8*10^7 | 20 | C | DSC_161 | shoot through no degrader.ripple filter 3mm. exposure 0.5 sec | |
14 | high | 430.1 | - | 8*10^7 | 3.4 | C | DSC_162 | shoot through. PMMA 5 cm | |
15 | high | 430.1 | - | 8*10^7 | 7.8 | C | DSC_163 | shoot through. PMMA 5cm | |
16 | high | 430.1 | - | 8*10^7 | 20 | C | DSC_164 | shoot through. PMMA 5cm | |
17 | high | 220.51 | - | 8*10^8 | 4.9 | He | DSC_165 | shoot through. PMMA 5 cm. exposure 0.1 | |
18 | high | 220.51 | - | 8*10^8 | 8.1 | He | DSC_166 | shoot through. PMMA 5cm | |
19 | high | 220.51 | - | 8*10^8 | 10.1 | He | DSC_167 | shoot through. PMMA 5cm | |
20 | high | 221.06 | - | 3.2*10^9 | 8.1 | p | DSC_168 | shoot through. PMMA 5 cm. exposure 0.2 | |
21 | high | 221.06 | - | 3.2*10^9 | 11.1 | p | DSC_169 | shoot through. PMMA 5cm | |
22 | high | 221.06 | - | 3.2*10^9 | 20 | p | DSC_170 | shoot through. PMMA 5cm | |
23 | high | 430.1 | - | 8*10^7 | 3.4 | C | DSC_172 | shoot through. no absorber. exposure 0.1 | |
24 | high | 430.1 | - | 8*10^7 | 7.8 | C | DSC_173 | shoot through. no absorber | |
25 | high | 430.1 | - | 8*10^7 | 20 | C | DSC_175 | shoot through. no absorber. exposure 0.2 sec |
- the case has been ROTEATED around. We now shoot on the FRONT window
Run number | Full Well Mode | Beam Energy (MeV/u) | Range (estimated) | N particles | Spot size (mm) | ion type | DSLR file name | Comments | |
---|---|---|---|---|---|---|---|---|---|
N | well mode | Energy MeV/u | Range | particles | Spot FWHM | test | dslr file name DSC_ | comments | |
26 | high | 60.9 | - | 6*10^8 | 26.3 | p | DSC_176 | front window Intensity chack. exposure 0.5 sec | |
27 | high | 60.8 | - | 2*10^8 | 15.4 | He | DSC_178 | front window Intensity chack. exposure 0.5 sec | |
28 | high | 110.6 | - | 2*10^7 | 8.4 | C | DSC_180 | front window Intensity chack. exposure 0.5 sec | |
29 | high | 430.1 | - | 8*10^7 | 3.4 | C | DSC_181 | front window shoot through. no absorber. exposure 0.2 sec | |
30 | high | 430.1 | - | 8*10^7 | 7.8 | C | DSC_182 | shoot through. no absorber | |
31 | high | 430.1 | - | 8*10^7 | 20 | C | DSC_183 | shoot through. no absorber. | |
32 | high | 221.06 | - | 3.2*10^9 | 20.0 | p | DSC_184 | shoot through no degrader. | |
33 | high | 221.06 | - | 3.2*10^9 | 11.1 | p | DSC_185 | shoot through no degrader. | |
34 | high | 221.06 | - | 3.2*10^9 | 8.1 | p | DSC_186 | shoot through no degrader. | |
35 | high | 220.51 | - | 8*10^8 | 4.9 | He | DSC_187 | shoot through no degrader. exposure 0.1 sec | |
36 | high | 220.51 | - | 8*10^8 | 8.1 | He | DSC_188 | shoot through no degrader. | |
37 | high | 220.51 | - | 8*10^8 | 10.1 | He | DSC_190 | shoot through no degrader. | |
38 | high | 220.51 | - | 8*10^8 | 4.9 | He | DSC_191 | shoot through 5cm PMMA. exposure 0.1 sec | |
39 | high | 220.51 | - | 8*10^8 | 8.1 | He | DSC_192 | shoot through 5cm PMMA. | |
40 | high | 220.51 | - | 8*10^8 | 10.1 | He | DSC_193 | shoot through 5cm PMMA. | |
41 | high | 430.1 | - | 8*10^7 | 3.4 | C | DSC_194 | front window shoot through. 5cm PMMA. exposure 0.2 sec | |
42 | high | 430.1 | - | 8*10^7 | 7.8 | C | DSC_195 | shoot through. 5cm PMMA | |
43 | high | 430.1 | - | 8*10^7 | 20 | C | DSC_196 | shoot through. 5cm PMMA. | |
44 | high | 221.06 | - | 3.2*10^9 | 8.1 | p | DSC_197 | shoot through 5cm PMMA. exposure 0.2 sec | |
45 | high | 221.06 | - | 3.2*10^9 | 11.1 | p | DSC_198 | shoot through 5cm PMMA. | |
46 | high | 221.06 | - | 3.2*10^9 | 20.0 | p | DSC_199 | shoot through 5cm PMMA. | |
47 | high | 120.1 | - | 1.2*10^9 | 13.4 | p | DSC_201 | about 10 cm range. exposure 0.1 sec | |
48 | high | 120.1 | - | 1.2*10^9 | 14.4 | p | DSC_202 | about 10 cm range | |
49 | high | 120.1 | - | 1.2*10^9 | 15.4 | p | DSC_203 | about 10 cm range | |
50 | high | 120.1 | - | 1.2*10^9 | 16.5 | p | DSC_204 | about 10 cm range | |
51 | high | 120.1 | - | 1.2*10^9 | 19.2 | p | DSC_205 | about 10 cm range | |
52 | high | 120.1 | - | 1.2*10^9 | 20.9 | p | DSC_206 | about 10 cm range | |
53 | high | 120.42 | - | 3*10^8 | 8.1 | He | DSC_207 | about 10 cm range. exposure 0.1 sec | |
54 | high | 120.4 | - | 3*10^8 | 8.9 | He | DSC_208 | about 10 cm range | |
55 | high | 120.4 | - | 3*10^8 | 10.4 | He | DSC_209 | about 10 cm range | |
56 | high | 120.4 | - | 3*10^8 | 12 | He | DSC_210 | about 10 cm range | |
57 | high | 219.8 | - | 8*10^7 | 4.7 | C | DSC_211 | about 10 cm range. exposure 0.1 sec | |
58 | high | 219.8 | - | 8*10^7 | 6.4 | C | DSC_212 | about 10 cm range | |
59 | high | 219.8 | - | 8*10^7 | 8.5 | C | DSC_213 | about 10 cm range | |
60 | high | 219.8 | - | 8*10^7 | 10.3 | C | DSC_214 | about 10 cm range | |
61 | high | 219.8 | - | 8*10^7 | 15. | C | DSC_215 | about 10 cm range | |
62 | high | 219.8 | - | 8*10^7 | 20. | C | DSC_216 | about 10 cm range | |
63 | high | 219.8 | - | 1.2*10^9 | 4.7 | C | DSC_217 | 2mm PMMA absorber. exposure 0.1 sec | |
64 | high | 120.42 | - | 3*10^8 | 8.1 | He | DSC_218 | 2mm PMMA absorber. exposure 0.1 sec | |
65 | high | 120.1 | - | 1.2*10^9 | 13.4 | p | DSC_219 | 2mm PMMA absorber. exposure 0.1 sec | |
66 | high | 120.1 | - | 1.2*10^9 | 13.4 | p | DSC_220 | 1mm PMMA absorber. exposure 0.1 sec | |
67 | high | 219.8 | - | 8*10^7 | 4.7 | C | DSC_222 | 1mm PMMA absorber. exposure 0.1 sec | |
68 | high | 120.42 | - | 3*10^8 | 8.1 | He | DSC_223 | 1mm PMMA absorber. exposure 0.1 sec | |
69 | high | 120.42 | - | 3*10^8 | 8.1 | He | DSC_224 | 5mm PMMA absorber. exposure 0.1 sec | |
70 | high | 120.1 | - | 1.2*10^9 | 13.4 | p | DSC_225 | 5mm PMMA absorber. exposure 0.1 sec | |
71 | high | 219.8 | - | 8*10^7 | 4.7 | C | DSC_226 | 5mm PMMA absorber. exposure 0.1 sec | |
72 | high | 219.8 | - | 8*10^7 | 4.7 | C | DSC_227 | 10mm PMMA absorber. exposure 0.1 sec | |
73 | high | 120.42 | - | 3*10^8 | 8.1 | He | DSC_228 | 10mm PMMA absorber. exposure 0.1 sec | |
74 | high | 120.1 | - | 1.2*10^9 | 13.4 | p | DSC_229 | 10mm PMMA absorber. exposure 0.1 sec | |
75 | high | 120.1 | - | 1.2*10^9 | 13.4 | p | DSC_230 | 20mm PMMA absorber. exposure 0.1 sec | |
76 | high | 219.8 | - | 8*10^7 | 4.7 | C | - | 20mm PMMA absorber. DSLR out of charge | |
77 | high | 120.42 | - | 3*10^8 | 8.1 | He | - | 20mm PMMA absorber. - | |
78 | high | 120.42 | - | 3*10^8 | 8.1 | He | - | 50mm PMMA absorber. - | |
79 | high | 120.1 | - | 1.2*10^9 | 13.4 | p | - | 50mm PMMA absorber. | |
80 | high | 219.8 | - | 8*10^7 | 4.7 | C | - | 50mm PMMA absorber. | |
81 | high | max 116.85 min 98.27 | - | 1.2*10^9 | 13.7 - 16 | p | - | SOBP no absorber. n. of steps in the file sent by email at 3.10 am on 13 Apr 2019. sensor: 10 pix in the center | |
82 | high | - | - | - | - | - | - | background. sensor 10 px in the center |
|