Proton Calorimetry/Meetings/2022/01/12: Difference between revisions

Revision as of 12:59, 13 January 2022

Simon Jolly, Saad Shaikh, Jeremy Ocampo

Submitted application for HITRIplus internships.
Met with Ruben to discuss April and November UCLH results.
- Ruben suggested possible sources of ionising particles for after light-injection tests.
Package from NUVIA currently in Dartford – awaiting release. Contents unknown.
Rev C boards currently not working: USB-C pin-outs swapped and similar problems with Molex. Marko currently working on fix for Molex.
- Will ask Marko about high temperature on IC5.
Nikon images produced poor results – most if not all images saturated. Poor fit results even with shortest exposure time.
- Future experiments should use exposure time of maximum 0.1s.
- Will retry analysis with NEF images and by taking central stripe of image.

@@ Line 6: / Line 6: @@
 === [[ELogs/SaadShaikh|Saad Shaikh]] ===
-*
+*Submitted application for HITRIplus internships.
+*Met with Ruben to discuss April and November UCLH results.
+**Ruben suggested possible sources of ionising particles for after light-injection tests.
+*Package from NUVIA currently in Dartford – awaiting release. Contents unknown.
+*Rev C boards currently not working: USB-C pin-outs swapped and similar problems with Molex. Marko currently working on fix for Molex.
+**Will ask Marko about high temperature on IC5.
+*Nikon images produced poor results – most if not all images saturated. Poor fit results even with shortest exposure time.
+**Future experiments should use exposure time of maximum 0.1s.
+**Will retry analysis with NEF images and by taking central stripe of image.