Proton Calorimetry/Experimental Runs/2022: Difference between revisions
Jump to navigation
Jump to search
SaadShaikh (talk | contribs) No edit summary |
SaadShaikh (talk | contribs) No edit summary |
||
| Line 14: | Line 14: | ||
: Experimental measurements at UCLH. Third beam test with photodiode DAQ system. | : Experimental measurements at UCLH. Third beam test with photodiode DAQ system. | ||
: Test light output with Rev. B prototype containing white sheets and clear sheets, comparing with CMOS sensor. Test new Rev.C prototype. | : Test light output with Rev. B prototype containing white sheets and clear sheets, comparing with CMOS sensor. Test new Rev.C prototype. | ||
: Also contains details on follow-up crosstalk measurements of the two prototypes. | |||
; [[/MayLED|LED Optical Isolation Tests]] | ; [[/MayLED|LED Optical Isolation Tests]] | ||
: Lab tests at UCL using LED fibre injection and unpainted sheets with layers of material in between to provide optical isolation. | : Lab tests at UCL using LED fibre injection and unpainted sheets with layers of material in between to provide optical isolation. | ||
: Test cross-talk and light levels with no material, white paper, black card and mylar foil | : Test cross-talk and light levels with no material, white paper, black card and mylar foil | ||
Revision as of 16:55, 17 August 2022
- Manchester FLASH Measurements
- FLASH range QA measurements at The Christie.
- Also measure WET of stack using PTW PeakFinder.
- Clatterbridge Range Measurements
- Pristine Bragg peak and SOBP measurements at Clatterbridge using compact QuARC prototype.
- Demonstrate detector principle and SOBP fitting.
- UCLH WET Measurements
- Measurements of the WET of stack of white painted sheets and clear sheets (with Mylar) from previous UCLH beam test.
- Use IBA Giraffe to measure WET during UCLH monthly QA session.
- UCLH 16th June 2022
- Experimental measurements at UCLH. Third beam test with photodiode DAQ system.
- Test light output with Rev. B prototype containing white sheets and clear sheets, comparing with CMOS sensor. Test new Rev.C prototype.
- Also contains details on follow-up crosstalk measurements of the two prototypes.
- LED Optical Isolation Tests
- Lab tests at UCL using LED fibre injection and unpainted sheets with layers of material in between to provide optical isolation.
- Test cross-talk and light levels with no material, white paper, black card and mylar foil